Engineering Fracture Mechanics, ‎0013-7944

Journal

ISSNs0013-7944
1 - 50 out of 50Page size: 100

Research output

  1. 2024
  2. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Investigation of fracture mechanical properties of a brass alloy with microstructural variations

    Klaushofer, M., Stoschka, M., Maier, B. & Grün, F., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 22 p., 110564.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Prediction of thermal shock induced cracking in multi-material ceramics using a stress-energy criterion

    Papšík, R., Sevecek, O., Schlacher, J. & Bermejo Moratinos, R., May 2024, In: Engineering Fracture Mechanics. 303, 110121.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2023
  6. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    A methodology for performing and evaluating miniaturized wedge splitting tests accompanied by digital image correlation

    Fruhstorfer, J. & Gruber, D., 30 May 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 288.2023, 4 August, 15 p., 109357.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2022
  9. Published

    Improved concept for iterative crack propagation using configurational forces for targeted angle correction

    Frankl, S. M., Pletz, M. & Schuecker, C., 1 May 2022, In: Engineering Fracture Mechanics. 266.2022, 1 May, 15 p., 108403.

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2021
  11. Published

    Quasi-static and dynamic fracture toughness of a γ-TiAl alloy: Measurement techniques, fractography and interpretation

    Lintner, A., Pippan, R., Schloffer, M. & Hohenwarter, A., Dec 2021, In: Engineering Fracture Mechanics. 258.2021, December, 14 p., 108081.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Effect of mechanical loading history on fatigue crack growth of non-crystallizing rubber

    Schieppati, J., Schrittesser, B., Wondracek, A., Robin, S., Holzner, A. & Pinter, G., Nov 2021, In: Engineering Fracture Mechanics. 257.2021, November, 13 p., 108010.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Size effect assessment by Weibull’s approach and the coupled criterion

    Doitrand, A., Henry, R., Lube, T. & Meille, S., 10 Sept 2021, In: Engineering Fracture Mechanics. 256, 107979.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Asymmetric creep modeling of common refractory ceramics with high temperature wedge splitting test

    Jin, S. & Harmuth, H., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 12 p., 107819.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Ductile failure modelling in pre-cracked solids using coupled fracture locus theory

    Baltic, S., Magnien, J., Kolitsch, S., Gänser, H.-P., Antretter, T. & Hammer, R., Jul 2021, In: Engineering Fracture Mechanics. 252.2021, July, 13 p., 107845.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  17. 2019
  18. E-pub ahead of print

    Application of the material inhomogeneity effect for the improvement of fracture toughness of a brittle polymer

    Tiwari, A., Wiener, J., Arbeiter, F., Pinter, G. & Kolednik, O., 4 Dec 2019, (E-pub ahead of print) In: Engineering Fracture Mechanics. 224.2020, March, 16 p., 106776.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    On the behaviour of non-propagating cracks in steel and aluminium castings

    Schuscha, M., Aigner, R., Pomberger, S., Oberreiter, M., Leitner, M. & Stoschka, M., 17 Sept 2019, In: Engineering Fracture Mechanics. 220.2019, 15 October, 106670.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2018
  21. Published

    Understanding the tensile strength of ceramics in the presence of small critical flaws

    Martin, E., Leguillon, D., Sevecek, O. & Bermejo, R., 1 Oct 2018, In: Engineering Fracture Mechanics. 201, p. 167-175 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. E-pub ahead of print

    Numerical simulations of cracked round bar test: Effect of residual stresses and crack asymmetry

    Poduška, J., Hutař, P., Frank, A., Kučera, J., Sadílek, J., Pinter, G. & Náhlík, L., 27 Jun 2018, (E-pub ahead of print) In: Engineering Fracture Mechanics. 203.2018, November, p. 18-31 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Comparison of J-integral methods for the characterization of tough polypropylene grades close to the glass transition temperature

    Gosch, A., Arbeiter, F. J., Berer, M. & Pinter, G., 22 Jun 2018, In: Engineering Fracture Mechanics. 203.2018, November, p. 2-17 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2017
  25. Published

    Modelling and inverse investigation of the fracture process for a magnesia spinel refractory using a heterogeneous continuum model

    Dai, Y., Gruber, D., Harmuth, H. & Jin, S., Sept 2017, In: Engineering Fracture Mechanics. 182.2017, September, p. 438-448 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. E-pub ahead of print

    Finite element study of mode I crack opening effects in compression-loaded cracked cylinders

    Berer, M., Mitev, I. & Pinter, G. G., 10 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 175.2017, 15 April, p. 1-14 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Lifetime Prediction of Ceramic Components - A Case Study on Hybrid Rolling Contact

    Khader, I., Rasche, S., Lube, T., Raga, R., Degenhardt, U. & Kailer, A., 2017, In: Engineering Fracture Mechanics. 169, p. 292-308 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2016
  30. Published

    Prediction of effective mode II fatigue crack growth threshold for metallic materials

    Vojtek, T., Pippan, R., Hohenwarter, A. & Pokluda, J., 16 Sept 2016, In: Engineering Fracture Mechanics. 174.2017, 1 April, p. 117-126 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. E-pub ahead of print

    Fracture toughness of high density polyethylene: Fatigue pre-cracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodríguez, J., Arbeiter, F., Pinter, G. G. & Martínez, A. B., 13 Jul 2016, (E-pub ahead of print) In: Engineering Fracture Mechanics. 149.2015, November, p. 199-213 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Calculation of crack driving Forces of surface cracks subjected to rolling/sliding contact

    Krácalik, M., Daves, W. & Antretter, T., 2016, In: Engineering Fracture Mechanics. 152, 2, p. 10-25

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Modelling of edge crack formation and propagation in ceramic laminates using the stress-energy coupled criterion

    Sevecek, O., Kotoul, M., Leguillon, D. P., Martin, E. & Bermejo, R., 2016, In: Engineering Fracture Mechanics. 167, p. 45–55

    Research output: Contribution to journal › Article › Research › peer-review

  34. 2014
  35. Published

    Determination of Young's modulus, fracture energy and tensile strength of refractories by inverse estimation of a wedge splitting procedure

    Jin, S., Gruber, D. & Harmuth, H., 2014, In: Engineering Fracture Mechanics. 116, p. 228-236

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins

    Stelzer, S., Brunner, A., Argüelles, A., Murphy, N., Cano, G. M. & Pinter, G., 2014, In: Engineering Fracture Mechanics. 116, p. 92-107

    Research output: Contribution to journal › Article › Research › peer-review

  37. 2013
  38. Published

    Investigation of slow crack growth initiation in polyethylene pipe grades with accelerated cyclic tests

    Redhead, A., Frank, A. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 101, p. 2-9

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Prediction of the crack bifurcation in layered ceramics with high residual stresses

    Sevecek, O., Bermejo Moratinos, R. & Kotoul, M., 2013, In: Engineering Fracture Mechanics. 108, p. 120-138

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Subcritical Crack Growth on Low Temperature Co-fired Ceramics under Biaxial Loading

    Bermejo Moratinos, R., Supancic, P., Krautgasser, C., Morrell, R. & Danzer, R., 2013, In: Engineering Fracture Mechanics. 100, p. 108-121

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    The effect of residual stress on polymer pipe lifetime

    Hutar, P., Sevcik, M., Andreas, F., Nahlik, L., Kucera, J. & Pinter, G., 2013, In: Engineering Fracture Mechanics. 108, p. 98-108

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Three-dimensional morphology of fracture surfaces generated by modes II and III fatigue loading in ferrite and austenite

    Vojtek, T., Pokluda, J., Hohenwarter, A. & Pippan, R., 2013, In: Engineering Fracture Mechanics. 108, p. 285-293

    Research output: Contribution to journal › Article › Research › peer-review

  43. 2011
  44. Published

    A numerical methodology for lifetime estimation of HDPE pressure pipes

    Hutar, P., Sevcik, M., Nahlik, L., Pinter, G., Frank, A. & Mitev, I., 2011, In: Engineering Fracture Mechanics. 78, p. 3049-3058

    Research output: Contribution to journal › Article › Research › peer-review

  45. 2010
  46. Published

    Computational and experimental investigation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2010, In: Engineering Fracture Mechanics. p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Cracks in Inhomogeneous Materials: Comprehensive Assessment Using the Configurational Forces Concepts

    Kolednik, O., Predan, J. & Fischer, F. D., 2010, In: Engineering Fracture Mechanics. 77, p. 2698-2711

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    High failure resistance layered ceramics using crack bifurcation and interface delamination as reinforcement mechanisms

    Bermejo Moratinos, R. & Danzer, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2126-2135

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Numerical analysis on special cracking phenomena of residual compressive inter-layers in ceramic laminates

    Chen, C., Bermejo Moratinos, R. & Kolednik, O., 2010, In: Engineering Fracture Mechanics. 77, p. 2567-2576

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Prediction of crack propagation in layered ceramics with strong interfaces

    Nahlik, L., Lucie, S., Hutar, P. & Bermejo Moratinos, R., 2010, In: Engineering Fracture Mechanics. 77, p. 2192-2199

    Research output: Contribution to journal › Article › Research › peer-review

  51. 2009
  52. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Development of a standardized procedure for the characterization of interlaminar crack growth in advanced composites under fatigue mode i loading conditions

    Brunner, A. J., Murphy, N. & Pinter, G., 2009, In: Engineering Fracture Mechanics. 76, p. 2678-2689

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Uniaxial and biaxial fracture behaviour of refractory materials

    Tschegg, E., Fendt, K. T., Manhart, C. & Harmuth, H., 2009, In: Engineering Fracture Mechanics. 76, p. 2249-2259

    Research output: Contribution to journal › Article › Research › peer-review

  56. 2008
  57. Published

    Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

    Trattnig, G., Antretter, T. & Pippan, R., 2008, In: Engineering Fracture Mechanics. 75, p. 223-235

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC-Co cemented carbides

    Torres, Y., Bermejo Moratinos, R., Llanes, L. & Anglada, M., 2008, In: Engineering Fracture Mechanics. 75, p. 4422-4430

    Research output: Contribution to journal › Article › Research › peer-review

  59. 2007
  60. Published

    A micromechnics-based model for micro-toughness estimation from dimple geometry measurements

    Srinivasan, K., Kolednik, O. & Siegmund, T., 2007, In: Engineering Fracture Mechanics. 74, p. 1323-1343

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Effect of single overloads in ductile metals: A reconsideration

    Bichler, C. & Pippan, R., 2007, In: Engineering Fracture Mechanics. 74, p. 1344-1359

    Research output: Contribution to journal › Article › Research › peer-review

  62. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    On the local variation of the crack driving force in a double mismatched weld

    Predan, J., Gubeljak, N. & Kolednik, O., 2007, In: Engineering Fracture Mechanics. 74, p. 1739-1757

    Research output: Contribution to journal › Article › Research › peer-review

  64. 2005
  65. Published

    Three-Dimensional Modeling of Ductile Crack Growth: Cohesive Zone Parameters and Crack Tip Triaxiality

    Chen, C. R., Kolednik, O., Heerens, J. & Fischer, F. D., 2005, In: Engineering Fracture Mechanics. 72, p. 2072-2094

    Research output: Contribution to journal › Article › Research › peer-review

  66. 2004
  67. Published

    A Threshold Stress Intensity Factor at the Onset of Stable Extension of Knoop Indentation Cracks

    Lube, T. & Fett, T., 2004, In: Engineering Fracture Mechanics. p. 2263-2269

    Research output: Contribution to journal › Article › Research › peer-review

View graph of relations