Engineering Fracture Mechanics, ‎0013-7944

Journal

ISSNs0013-7944
1 - 10 out of 50Page size: 10

Research output

  1. 2004
  2. Published

    A Threshold Stress Intensity Factor at the Onset of Stable Extension of Knoop Indentation Cracks

    Lube, T. & Fett, T., 2004, In: Engineering Fracture Mechanics. p. 2263-2269

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2005
  4. Published

    Three-Dimensional Modeling of Ductile Crack Growth: Cohesive Zone Parameters and Crack Tip Triaxiality

    Chen, C. R., Kolednik, O., Heerens, J. & Fischer, F. D., 2005, In: Engineering Fracture Mechanics. 72, p. 2072-2094

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2007
  6. Published

    A micromechnics-based model for micro-toughness estimation from dimple geometry measurements

    Srinivasan, K., Kolednik, O. & Siegmund, T., 2007, In: Engineering Fracture Mechanics. 74, p. 1323-1343

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Effect of single overloads in ductile metals: A reconsideration

    Bichler, C. & Pippan, R., 2007, In: Engineering Fracture Mechanics. 74, p. 1344-1359

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Fracture Statistics of Ceramics - Weibull Statistics and Deviations from Weibull Statistics

    Danzer, R., Supancic, P., Pascual Herrero, J. & Lube, T., 2007, In: Engineering Fracture Mechanics. 74, p. 2919-2932

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    On the local variation of the crack driving force in a double mismatched weld

    Predan, J., Gubeljak, N. & Kolednik, O., 2007, In: Engineering Fracture Mechanics. 74, p. 1739-1757

    Research output: Contribution to journal › Article › Research › peer-review

  10. 2008
  11. Published

    Fracture of austenitic steel subject to a wide range of stress triaxiality ratios and crack deformation modes

    Trattnig, G., Antretter, T. & Pippan, R., 2008, In: Engineering Fracture Mechanics. 75, p. 223-235

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Influence of notch radius and R-curve behaviour on the fracture toughness evaluation of WC-Co cemented carbides

    Torres, Y., Bermejo Moratinos, R., Llanes, L. & Anglada, M., 2008, In: Engineering Fracture Mechanics. 75, p. 4422-4430

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2009
  14. Published

    A fracture mechanics concept for the accelerated characterization of creep crack growth in PE-HD pipe grades

    Frank, A., Freimann, W., Pinter, G. & Lang, R., 2009, In: Engineering Fracture Mechanics. 76, p. 2780-2787

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Computational and experimental simulation of delamination in L-shaped laminated composite components

    Wimmer, G., Kitzmüller, W., Pinter, G., Wettemann, T. & Pettermann, H. E., 2009, In: Engineering Fracture Mechanics. 76, p. 2810-2820

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 Next
View graph of relations