Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction. / Naseri Seftejani, Masab; Schenk, Johannes; Spreitzer, Daniel et al.
in: Materials, Jahrgang 13.2020, Nr. 4, 935, 20.02.2020.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{f1b710513d3e40afbc8fe5ff221879e1,
title = "Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction",
abstract = "Replacing carbon by hydrogen is a huge step towards reducing CO 2 emissions in the iron- and steel-making industry. The reduction of iron oxides using hydrogen plasma smelting reduction as an alternative to conventional steel-making routes has been studied at Montanuniversitaet Leoben, Austria. The aim of this work was to study the slag formation during the reduction process and the reduction behaviour of iron oxides. Furthermore the reduction behaviour of iron ore during continuous feeding was assessed. Mixtures of iron ore and calcined lime with a basicity of 0, 0.8, 1.6, 2.3, and 2.9 were melted and reduced by hydrogen. The off-gas composition was measured during the operations to calculate the process parameters. The reduction parameters, namely the degree of reduction, degree of hydrogen utilisation, produced iron, and slag, are presented. The results of the batch-charged experiments showed that at the beginning of the reduction process, the degree of hydrogen utilisation was high, and then, it decreased over the operation time. In contrast, during the continuous-feeding experiment, the degree of hydrogen utilisation could be kept approximately constant. The highest degrees of reduction and hydrogen utilisation were obtained upon the application of a slag with a basicity of 2.3. The experiment showed that upon the continuous feeding of iron ore, the best conditions for the reduction process using hydrogen could be applied. ",
keywords = "slag; basicity; hydrogen plasma; smelting reduction; iron oxide; plasma arc; hydrogen utilisation; degree of reduction; hematite",
author = "{Naseri Seftejani}, Masab and Johannes Schenk and Daniel Spreitzer and Zarl, {Michael Andreas}",
year = "2020",
month = feb,
day = "20",
doi = "https://doi.org/10.3390/ma13040935",
language = "English",
volume = "13.2020",
journal = "Materials",
issn = "1996-1944",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "4",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Slag Formation during Reduction of Iron Oxide Using Hydrogen Plasma Smelting Reduction

AU - Naseri Seftejani, Masab

AU - Schenk, Johannes

AU - Spreitzer, Daniel

AU - Zarl, Michael Andreas

PY - 2020/2/20

Y1 - 2020/2/20

N2 - Replacing carbon by hydrogen is a huge step towards reducing CO 2 emissions in the iron- and steel-making industry. The reduction of iron oxides using hydrogen plasma smelting reduction as an alternative to conventional steel-making routes has been studied at Montanuniversitaet Leoben, Austria. The aim of this work was to study the slag formation during the reduction process and the reduction behaviour of iron oxides. Furthermore the reduction behaviour of iron ore during continuous feeding was assessed. Mixtures of iron ore and calcined lime with a basicity of 0, 0.8, 1.6, 2.3, and 2.9 were melted and reduced by hydrogen. The off-gas composition was measured during the operations to calculate the process parameters. The reduction parameters, namely the degree of reduction, degree of hydrogen utilisation, produced iron, and slag, are presented. The results of the batch-charged experiments showed that at the beginning of the reduction process, the degree of hydrogen utilisation was high, and then, it decreased over the operation time. In contrast, during the continuous-feeding experiment, the degree of hydrogen utilisation could be kept approximately constant. The highest degrees of reduction and hydrogen utilisation were obtained upon the application of a slag with a basicity of 2.3. The experiment showed that upon the continuous feeding of iron ore, the best conditions for the reduction process using hydrogen could be applied.

AB - Replacing carbon by hydrogen is a huge step towards reducing CO 2 emissions in the iron- and steel-making industry. The reduction of iron oxides using hydrogen plasma smelting reduction as an alternative to conventional steel-making routes has been studied at Montanuniversitaet Leoben, Austria. The aim of this work was to study the slag formation during the reduction process and the reduction behaviour of iron oxides. Furthermore the reduction behaviour of iron ore during continuous feeding was assessed. Mixtures of iron ore and calcined lime with a basicity of 0, 0.8, 1.6, 2.3, and 2.9 were melted and reduced by hydrogen. The off-gas composition was measured during the operations to calculate the process parameters. The reduction parameters, namely the degree of reduction, degree of hydrogen utilisation, produced iron, and slag, are presented. The results of the batch-charged experiments showed that at the beginning of the reduction process, the degree of hydrogen utilisation was high, and then, it decreased over the operation time. In contrast, during the continuous-feeding experiment, the degree of hydrogen utilisation could be kept approximately constant. The highest degrees of reduction and hydrogen utilisation were obtained upon the application of a slag with a basicity of 2.3. The experiment showed that upon the continuous feeding of iron ore, the best conditions for the reduction process using hydrogen could be applied.

KW - slag; basicity; hydrogen plasma; smelting reduction; iron oxide; plasma arc; hydrogen utilisation; degree of reduction; hematite

UR - http://www.scopus.com/inward/record.url?scp=85082060223&partnerID=8YFLogxK

U2 - https://doi.org/10.3390/ma13040935

DO - https://doi.org/10.3390/ma13040935

M3 - Article

VL - 13.2020

JO - Materials

JF - Materials

SN - 1996-1944

IS - 4

M1 - 935

ER -