Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys. / Trink, Bernhard; Weißensteiner, Irmgard; Uggowitzer, Peter et al.
in: Acta Materialia, Jahrgang 257.2023, Nr. 15 September, 119160, 15.09.2023.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Trink B, Weißensteiner I, Uggowitzer P, Strobel K, Hofer-Roblyek A, Pogatscher S. Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys. Acta Materialia. 2023 Sep 15;257.2023(15 September):119160. Epub 2023 Jul 16. doi: 10.1016/j.actamat.2023.119160

Bibtex - Download

@article{12721c5fc5e14aa3ba5d45c803316ba1,
title = "Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys",
abstract = "This study introduces new alloys, which combine the age-hardening capability of Al-Mg-Si alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic phases used in foil stock. In detail, the processing and microstructure–property relations in new crossover aluminum alloys derived from 6xxx and 8xxx foil stock alloys, is shown. A highly Fe-rich intermetallic phase content was deployed to conceptually mimic high scrap content. Fast and slow solidification rates were applied to represent thin strip and direct chill casting, respectively. The effects of adding Fe and Mn to alloy 6016 were examined, while the Si consumed in primary phases was partly adjusted to maintain age-hardening potential. It was shown that upon thermomechanical processing, primary intermetallic phases in the new alloys are finely fragmented and well dispersed, resulting in strong grain refinement and a uniform texture. Attractive combinations of strength and ductility were revealed, also in material processed under direct chill casting conditions. The new alloys{\textquoteright} high elongation values of up to 30%, and their age-hardening response, were similar to those seen in commercial alloy 6016, while their strain hardening capacity was significantly greater. This can be attributed mainly to the formation of geometrically necessary dislocations near primary Fe-rich intermetallic phases. The study discusses microstructure refinement on the basis of particle stimulated nucleation. It uses a simple model to describe the individual contributions to yield strength, including the effect of primary phases. It also models the effect of these particles on increased strain hardening and ductility.",
author = "Bernhard Trink and Irmgard Wei{\ss}ensteiner and Peter Uggowitzer and Katharina Strobel and Anna Hofer-Roblyek and Stefan Pogatscher",
year = "2023",
month = sep,
day = "15",
doi = "10.1016/j.actamat.2023.119160",
language = "English",
volume = "257.2023",
journal = "Acta Materialia",
issn = "1359-6454",
publisher = "Elsevier",
number = "15 September",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

AU - Trink, Bernhard

AU - Weißensteiner, Irmgard

AU - Uggowitzer, Peter

AU - Strobel, Katharina

AU - Hofer-Roblyek, Anna

AU - Pogatscher, Stefan

PY - 2023/9/15

Y1 - 2023/9/15

N2 - This study introduces new alloys, which combine the age-hardening capability of Al-Mg-Si alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic phases used in foil stock. In detail, the processing and microstructure–property relations in new crossover aluminum alloys derived from 6xxx and 8xxx foil stock alloys, is shown. A highly Fe-rich intermetallic phase content was deployed to conceptually mimic high scrap content. Fast and slow solidification rates were applied to represent thin strip and direct chill casting, respectively. The effects of adding Fe and Mn to alloy 6016 were examined, while the Si consumed in primary phases was partly adjusted to maintain age-hardening potential. It was shown that upon thermomechanical processing, primary intermetallic phases in the new alloys are finely fragmented and well dispersed, resulting in strong grain refinement and a uniform texture. Attractive combinations of strength and ductility were revealed, also in material processed under direct chill casting conditions. The new alloys’ high elongation values of up to 30%, and their age-hardening response, were similar to those seen in commercial alloy 6016, while their strain hardening capacity was significantly greater. This can be attributed mainly to the formation of geometrically necessary dislocations near primary Fe-rich intermetallic phases. The study discusses microstructure refinement on the basis of particle stimulated nucleation. It uses a simple model to describe the individual contributions to yield strength, including the effect of primary phases. It also models the effect of these particles on increased strain hardening and ductility.

AB - This study introduces new alloys, which combine the age-hardening capability of Al-Mg-Si alloys with the microstructure-controlling effect on processing of primary Fe-rich intermetallic phases used in foil stock. In detail, the processing and microstructure–property relations in new crossover aluminum alloys derived from 6xxx and 8xxx foil stock alloys, is shown. A highly Fe-rich intermetallic phase content was deployed to conceptually mimic high scrap content. Fast and slow solidification rates were applied to represent thin strip and direct chill casting, respectively. The effects of adding Fe and Mn to alloy 6016 were examined, while the Si consumed in primary phases was partly adjusted to maintain age-hardening potential. It was shown that upon thermomechanical processing, primary intermetallic phases in the new alloys are finely fragmented and well dispersed, resulting in strong grain refinement and a uniform texture. Attractive combinations of strength and ductility were revealed, also in material processed under direct chill casting conditions. The new alloys’ high elongation values of up to 30%, and their age-hardening response, were similar to those seen in commercial alloy 6016, while their strain hardening capacity was significantly greater. This can be attributed mainly to the formation of geometrically necessary dislocations near primary Fe-rich intermetallic phases. The study discusses microstructure refinement on the basis of particle stimulated nucleation. It uses a simple model to describe the individual contributions to yield strength, including the effect of primary phases. It also models the effect of these particles on increased strain hardening and ductility.

U2 - 10.1016/j.actamat.2023.119160

DO - 10.1016/j.actamat.2023.119160

M3 - Article

VL - 257.2023

JO - Acta Materialia

JF - Acta Materialia

SN - 1359-6454

IS - 15 September

M1 - 119160

ER -