Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Polymer nanocomposites with cellulose nanocrystals made by co-precipitation. / Natterodt, Jens Christoph; Shirole, Anuja; Sapkota, Janak et al.
in: Journal of Applied Polymer Science, Jahrgang 135.2018, Nr. 24, 45648, 09.08.2017.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Natterodt JC, Shirole A, Sapkota J, Zoppe J, Weder C. Polymer nanocomposites with cellulose nanocrystals made by co-precipitation. Journal of Applied Polymer Science. 2017 Aug 9;135.2018(24):45648. doi: 10.1002/app.45648

Author

Natterodt, Jens Christoph ; Shirole, Anuja ; Sapkota, Janak et al. / Polymer nanocomposites with cellulose nanocrystals made by co-precipitation. in: Journal of Applied Polymer Science. 2017 ; Jahrgang 135.2018, Nr. 24.

Bibtex - Download

@article{68b1d22730d24d0b91dec350b1173c3f,
title = "Polymer nanocomposites with cellulose nanocrystals made by co-precipitation",
abstract = "A premixing method to produce polymer nanocomposites with cellulose nanocrystals (CNCs) is reported. This method involves the dissolution and dispersion of a polymer and CNCs in an organic solvent, co-precipitation into water, drying of the resulting particles, and subsequent melt processing. The key aspect of the method is that it allows the kinetic trapping of well-dispersed CNCs in the polymer. Although the nanocomposite must be dried before subsequent melt-processing, the organic solvent can be removed by extraction in water and recycled, leaving only residual water in the composite, which is easily eliminated. This process presents numerous advantages compared with the time-consuming solvent casting process, which often suffers from incomplete organic solvent evaporation. As a testbed, polyurethane (PU) composites with up to 30% of CNCs were prepared. These materials were either melt-processed as produced or used as a masterbatch, i.e., they were diluted via melt-mixing with neat polymer toward nanocomposites with lower filler content. All nanocomposites prepared using this approach had a homogeneous appearance. They displayed similar mechanical properties as the corresponding reference materials made by solvent casting, and significantly better properties than materials prepared by direct melt mixing. ",
keywords = "Cellulose Nanocomposites, Cellulose Nanocrystals, Polymer, Nanocomposite, Polyurethane",
author = "Natterodt, {Jens Christoph} and Anuja Shirole and Janak Sapkota and Justin Zoppe and Christoph Weder",
year = "2017",
month = aug,
day = "9",
doi = "10.1002/app.45648",
language = "English",
volume = "135.2018",
journal = "Journal of Applied Polymer Science",
issn = "0021-8995",
number = "24",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

AU - Natterodt, Jens Christoph

AU - Shirole, Anuja

AU - Sapkota, Janak

AU - Zoppe, Justin

AU - Weder, Christoph

PY - 2017/8/9

Y1 - 2017/8/9

N2 - A premixing method to produce polymer nanocomposites with cellulose nanocrystals (CNCs) is reported. This method involves the dissolution and dispersion of a polymer and CNCs in an organic solvent, co-precipitation into water, drying of the resulting particles, and subsequent melt processing. The key aspect of the method is that it allows the kinetic trapping of well-dispersed CNCs in the polymer. Although the nanocomposite must be dried before subsequent melt-processing, the organic solvent can be removed by extraction in water and recycled, leaving only residual water in the composite, which is easily eliminated. This process presents numerous advantages compared with the time-consuming solvent casting process, which often suffers from incomplete organic solvent evaporation. As a testbed, polyurethane (PU) composites with up to 30% of CNCs were prepared. These materials were either melt-processed as produced or used as a masterbatch, i.e., they were diluted via melt-mixing with neat polymer toward nanocomposites with lower filler content. All nanocomposites prepared using this approach had a homogeneous appearance. They displayed similar mechanical properties as the corresponding reference materials made by solvent casting, and significantly better properties than materials prepared by direct melt mixing.

AB - A premixing method to produce polymer nanocomposites with cellulose nanocrystals (CNCs) is reported. This method involves the dissolution and dispersion of a polymer and CNCs in an organic solvent, co-precipitation into water, drying of the resulting particles, and subsequent melt processing. The key aspect of the method is that it allows the kinetic trapping of well-dispersed CNCs in the polymer. Although the nanocomposite must be dried before subsequent melt-processing, the organic solvent can be removed by extraction in water and recycled, leaving only residual water in the composite, which is easily eliminated. This process presents numerous advantages compared with the time-consuming solvent casting process, which often suffers from incomplete organic solvent evaporation. As a testbed, polyurethane (PU) composites with up to 30% of CNCs were prepared. These materials were either melt-processed as produced or used as a masterbatch, i.e., they were diluted via melt-mixing with neat polymer toward nanocomposites with lower filler content. All nanocomposites prepared using this approach had a homogeneous appearance. They displayed similar mechanical properties as the corresponding reference materials made by solvent casting, and significantly better properties than materials prepared by direct melt mixing.

KW - Cellulose Nanocomposites

KW - Cellulose Nanocrystals

KW - Polymer

KW - Nanocomposite

KW - Polyurethane

U2 - 10.1002/app.45648

DO - 10.1002/app.45648

M3 - Article

VL - 135.2018

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

SN - 0021-8995

IS - 24

M1 - 45648

ER -