TY - JOUR

T1 - Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

AU - Spörk, Martin

AU - Arbeiter, Florian

AU - Cajner, Hrvoje

AU - Sapkota, Janak

AU - Holzer, Clemens

PY - 2017/6/26

Y1 - 2017/6/26

N2 - Parts produced by extrusion-based additive manufacturing experience the disadvantage of consisting of many weld-lines,which consequently downgrade their mechanical properties. This work aims at maximizing the strength of printed parts by consider-ing and improving the intra- and inter-layer cohesion between adjacent strands. Therefore, printed poly(lactic acid) specimens werecharacterized by means of a particular tensile test setup, and the inter-layer cohesion of printed specimens was evaluated by means ofthe double cantilever beam test. A detailed parametric statistical evaluation, which included printing temperatures, layer thicknesses,and layer-designs, was complemented by the material’s viscosity data and the analysis of the specimens’ fracture surfaces and cross-sections. An optimal layer-design was found to be a key parameter in the optimization of strength with regard to different loadingdirections. Additionally, the maximization of the cohesion leads to a tremendous improvement in the mechanical performance of theprinted parts, resulting in strengths of roughly 90% of those of compression-molded parts. 2017 Wiley Periodicals, Inc. J. Appl. Polym.Sci. 2017, 134, 45401

AB - Parts produced by extrusion-based additive manufacturing experience the disadvantage of consisting of many weld-lines,which consequently downgrade their mechanical properties. This work aims at maximizing the strength of printed parts by consider-ing and improving the intra- and inter-layer cohesion between adjacent strands. Therefore, printed poly(lactic acid) specimens werecharacterized by means of a particular tensile test setup, and the inter-layer cohesion of printed specimens was evaluated by means ofthe double cantilever beam test. A detailed parametric statistical evaluation, which included printing temperatures, layer thicknesses,and layer-designs, was complemented by the material’s viscosity data and the analysis of the specimens’ fracture surfaces and cross-sections. An optimal layer-design was found to be a key parameter in the optimization of strength with regard to different loadingdirections. Additionally, the maximization of the cohesion leads to a tremendous improvement in the mechanical performance of theprinted parts, resulting in strengths of roughly 90% of those of compression-molded parts. 2017 Wiley Periodicals, Inc. J. Appl. Polym.Sci. 2017, 134, 45401

KW - extrusion

KW - mechanical properties

KW - microscopy

KW - structure-property relationships

KW - thermoplastics

U2 - 10.1002/app.45401

DO - 10.1002/app.45401

M3 - Article

VL - 134.2017

JO - Journal of Applied Polymer Science

JF - Journal of Applied Polymer Science

SN - 0021-8995

IS - 41

M1 - 45401

ER -