Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions
Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
Standard
in: Polymer Testing, Jahrgang 134.2024, Nr. May, 108444, 07.05.2024.
Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - JOUR
T1 - Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions
AU - Schrank, Theresia
AU - Ramoa, Bruno
AU - Feuchter, Michael
AU - Pinter, Gerald
AU - Pantani, Roberto
AU - Berer, Michael
N1 - Publisher Copyright: © 2024 The Authors
PY - 2024/5/7
Y1 - 2024/5/7
N2 - When injection molding semi-crystalline polymers, it is known that the resulting morphological and mechanical properties are strongly dependent on the processing conditions. Selectively influencing the performance of the final part as early as during processing is of great interest for industrial applications. To investigate the processing-structure-property correlation for a POM hompolymer resin, tensile specimens were manufactured under conventional injection molding conditions following a Design of Experimets (DoE). Morphological characterization was carried out by microscopy and X-ray measurements. Crystallinity was also measured by differential scanning calorimetry (DSC). Additionally, the (fracture) mechanical behaviour of the samples was assessed. Influences of the processing parameters on the crystalline structure and orientations within the material were identified. Furthermore, tensile tests were found to be sensitive to changes in morphology and processing, whereas the fracture behaviour did not change significantly despite the structural changes within the samples.
AB - When injection molding semi-crystalline polymers, it is known that the resulting morphological and mechanical properties are strongly dependent on the processing conditions. Selectively influencing the performance of the final part as early as during processing is of great interest for industrial applications. To investigate the processing-structure-property correlation for a POM hompolymer resin, tensile specimens were manufactured under conventional injection molding conditions following a Design of Experimets (DoE). Morphological characterization was carried out by microscopy and X-ray measurements. Crystallinity was also measured by differential scanning calorimetry (DSC). Additionally, the (fracture) mechanical behaviour of the samples was assessed. Influences of the processing parameters on the crystalline structure and orientations within the material were identified. Furthermore, tensile tests were found to be sensitive to changes in morphology and processing, whereas the fracture behaviour did not change significantly despite the structural changes within the samples.
UR - http://www.scopus.com/inward/record.url?scp=85192447256&partnerID=8YFLogxK
U2 - 10.1016/j.polymertesting.2024.108444
DO - 10.1016/j.polymertesting.2024.108444
M3 - Article
AN - SCOPUS:85192447256
VL - 134.2024
JO - Polymer Testing
JF - Polymer Testing
SN - 0142-9418
IS - May
M1 - 108444
ER -
