Mathematical Description and Experimental Analysis of Sucker Rod Pump Valve Movement of Sucker Rod Pump Life Extension
Publikationen: Thesis / Studienabschlussarbeiten und Habilitationsschriften › Masterarbeit
Standard
2023.
Publikationen: Thesis / Studienabschlussarbeiten und Habilitationsschriften › Masterarbeit
Harvard
APA
Vancouver
Author
Bibtex - Download
}
RIS (suitable for import to EndNote) - Download
TY - THES
T1 - Mathematical Description and Experimental Analysis of Sucker Rod Pump Valve Movement of Sucker Rod Pump Life Extension
AU - Tara, Ehab
N1 - embargoed until 18-05-2028
PY - 2023
Y1 - 2023
N2 - In the oil and gas industry, the sucker rod pump is a well-established and commonly used artificial lift system. While their operation is relatively straightforward, predicting the behavior of the downhole components can be challenging, primarily relying on approximations derived from dynamometer data gathered at the surface. The conversion of surface data to downhole movement is necessary due to the elongation of the sucker rod string, which can result in misinterpretations, reducing the efficiency of the artificial lift system and increasing operational costs. Technical failures may occur, requiring a workover, which can be time-consuming and costly. Thus, it is crucial to have a comprehensive understanding of the downhole component behavior to prevent operational inefficiencies and technical failures. This project focuses on the development and validation of a fluid dynamic model for sucker rod pumps, specifically in relation to the valve, and evaluates the pump under non-ideal operating conditions. The objective is to create a simulation model that accurately depicts the movement of the Sucker Rod Pump Ball Valve in relation to the downhole plunger's precise motion during various operation stages. Previous research has focused on estimating loads on the surface and evaluating downhole conditions using dynamometer cards, assuming the pump is running at ideal conditions. However, this project takes a bottom-up approach and considers the downhole components, factoring in the plunger kinematics as well as downhole pump condition and influencing parameters. A transient simulation model was developed by the simulation providing company AC2T research GmbH based on the Navier-Stokes equation to predict the valve closing times and impact speed on the seat during operation for changing ball density and valve geometry. To further develop the model, a 3D implementation was created, considering different valves used in the industry, and the model was validated by measuring the valve ball's position during operation as a function of time and impact speed at the Pump Test Facility at the Montanuniversity Leoben. After examining the critical speed in accordance with the square root law, the model was calibrated and verified. Overall, this thesis contributes to a better understanding of sucker rod pumps and their behavior under non-ideal operating conditions, which can lead to improved pump design and operation.
AB - In the oil and gas industry, the sucker rod pump is a well-established and commonly used artificial lift system. While their operation is relatively straightforward, predicting the behavior of the downhole components can be challenging, primarily relying on approximations derived from dynamometer data gathered at the surface. The conversion of surface data to downhole movement is necessary due to the elongation of the sucker rod string, which can result in misinterpretations, reducing the efficiency of the artificial lift system and increasing operational costs. Technical failures may occur, requiring a workover, which can be time-consuming and costly. Thus, it is crucial to have a comprehensive understanding of the downhole component behavior to prevent operational inefficiencies and technical failures. This project focuses on the development and validation of a fluid dynamic model for sucker rod pumps, specifically in relation to the valve, and evaluates the pump under non-ideal operating conditions. The objective is to create a simulation model that accurately depicts the movement of the Sucker Rod Pump Ball Valve in relation to the downhole plunger's precise motion during various operation stages. Previous research has focused on estimating loads on the surface and evaluating downhole conditions using dynamometer cards, assuming the pump is running at ideal conditions. However, this project takes a bottom-up approach and considers the downhole components, factoring in the plunger kinematics as well as downhole pump condition and influencing parameters. A transient simulation model was developed by the simulation providing company AC2T research GmbH based on the Navier-Stokes equation to predict the valve closing times and impact speed on the seat during operation for changing ball density and valve geometry. To further develop the model, a 3D implementation was created, considering different valves used in the industry, and the model was validated by measuring the valve ball's position during operation as a function of time and impact speed at the Pump Test Facility at the Montanuniversity Leoben. After examining the critical speed in accordance with the square root law, the model was calibrated and verified. Overall, this thesis contributes to a better understanding of sucker rod pumps and their behavior under non-ideal operating conditions, which can lead to improved pump design and operation.
KW - Sucker Rod Pump
KW - Geoenergy Engineering
KW - Artificial Lift System
KW - SRP Valve
KW - Dynamometer Card
KW - Simulation
KW - Sauggestängepumpen
KW - Geoenergietechnik
KW - künstliches Liftsystem
KW - SRP-Ventil
KW - Dynamometerkarte
KW - Simulation
M3 - Master's Thesis
ER -