Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques. / Thiele, Kathrin; Truschner, Christoph; Walkner, Christoph et al.
in: Metals : open access journal , Jahrgang 14.2024, Nr. 1, 103, 15.01.2024.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{6d588cbe5322420d895f413221911e51,
title = "Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques",
abstract = "Since steel cleanness comes to the fore of steel producers worldwide, it is necessary to understand the formation mechanism and modification of non-metallic inclusions (NMIs) in more detail. One central point is the identification of the source of especially interfering NMIs to prevent their evolution in the future. The present study applies two approaches to determine the source of NMIs in Ti-stabilized ultra-low carbon (ULC) steels—the active and the passive tracing. Both approaches are applied to an industrial experiment. The active tracing technique is focused on investigating the clogging layer formation in submerged entry nozzles and, hence, the origin of alumina particles. This method adds rare earth elements (REEs) directly to the melt to mark pre-existing deoxidation products at a certain point of the steelmaking process. The main concern of the passive method, the so-called REE fingerprint, is the determination of the source of mesoscopic NMIs. For the REE fingerprint, the pre-existing concentration of REEs in different potential sources and the investigated NMIs are measured by using an inductively coupled plasma mass spectrometer (ICP-MS). The resulting patterns are compared after normalizing the contents to chondrites, and the NMIs{\textquoteright} origins are identified. Concerning the EDS analysis and the resulting patterns from the REE fingerprint, the mold slag and, respectively, the casting powder were the sources of the investigated NMIs.",
keywords = "Non-metallic inclusions, tracing techniques, rare earth elements, rare earth element fingerprint, non-metallic inclusions, rare earth element fingerprint, rare earth elements, tracing techniques",
author = "Kathrin Thiele and Christoph Truschner and Christoph Walkner and Meisel, {Thomas C.} and Sergiu Ilie and Roman R{\"o}ssler and Michelic, {Susanne Katharina}",
note = "Publisher Copyright: {\textcopyright} 2024 by the authors.",
year = "2024",
month = jan,
day = "15",
doi = "10.3390/met14010103",
language = "English",
volume = "14.2024",
journal = "Metals : open access journal ",
issn = "2075-4701",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "1",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Investigating the Origin of Non-Metallic Inclusions in Ti-Stabilized ULC Steels Using Different Tracing Techniques

AU - Thiele, Kathrin

AU - Truschner, Christoph

AU - Walkner, Christoph

AU - Meisel, Thomas C.

AU - Ilie, Sergiu

AU - Rössler, Roman

AU - Michelic, Susanne Katharina

N1 - Publisher Copyright: © 2024 by the authors.

PY - 2024/1/15

Y1 - 2024/1/15

N2 - Since steel cleanness comes to the fore of steel producers worldwide, it is necessary to understand the formation mechanism and modification of non-metallic inclusions (NMIs) in more detail. One central point is the identification of the source of especially interfering NMIs to prevent their evolution in the future. The present study applies two approaches to determine the source of NMIs in Ti-stabilized ultra-low carbon (ULC) steels—the active and the passive tracing. Both approaches are applied to an industrial experiment. The active tracing technique is focused on investigating the clogging layer formation in submerged entry nozzles and, hence, the origin of alumina particles. This method adds rare earth elements (REEs) directly to the melt to mark pre-existing deoxidation products at a certain point of the steelmaking process. The main concern of the passive method, the so-called REE fingerprint, is the determination of the source of mesoscopic NMIs. For the REE fingerprint, the pre-existing concentration of REEs in different potential sources and the investigated NMIs are measured by using an inductively coupled plasma mass spectrometer (ICP-MS). The resulting patterns are compared after normalizing the contents to chondrites, and the NMIs’ origins are identified. Concerning the EDS analysis and the resulting patterns from the REE fingerprint, the mold slag and, respectively, the casting powder were the sources of the investigated NMIs.

AB - Since steel cleanness comes to the fore of steel producers worldwide, it is necessary to understand the formation mechanism and modification of non-metallic inclusions (NMIs) in more detail. One central point is the identification of the source of especially interfering NMIs to prevent their evolution in the future. The present study applies two approaches to determine the source of NMIs in Ti-stabilized ultra-low carbon (ULC) steels—the active and the passive tracing. Both approaches are applied to an industrial experiment. The active tracing technique is focused on investigating the clogging layer formation in submerged entry nozzles and, hence, the origin of alumina particles. This method adds rare earth elements (REEs) directly to the melt to mark pre-existing deoxidation products at a certain point of the steelmaking process. The main concern of the passive method, the so-called REE fingerprint, is the determination of the source of mesoscopic NMIs. For the REE fingerprint, the pre-existing concentration of REEs in different potential sources and the investigated NMIs are measured by using an inductively coupled plasma mass spectrometer (ICP-MS). The resulting patterns are compared after normalizing the contents to chondrites, and the NMIs’ origins are identified. Concerning the EDS analysis and the resulting patterns from the REE fingerprint, the mold slag and, respectively, the casting powder were the sources of the investigated NMIs.

KW - Non-metallic inclusions

KW - tracing techniques

KW - rare earth elements

KW - rare earth element fingerprint

KW - non-metallic inclusions

KW - rare earth element fingerprint

KW - rare earth elements

KW - tracing techniques

UR - http://www.scopus.com/inward/record.url?scp=85183352345&partnerID=8YFLogxK

U2 - 10.3390/met14010103

DO - 10.3390/met14010103

M3 - Article

VL - 14.2024

JO - Metals : open access journal

JF - Metals : open access journal

SN - 2075-4701

IS - 1

M1 - 103

ER -