In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber. / Wachtarczyk, Karol; Gąsior, Paweł; Kaleta, Jerzy et al.
in: Materials, Jahrgang 15.2022, Nr. 1, 77, 31.12.2021.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Vancouver

Wachtarczyk K, Gąsior P, Kaleta J, Anuszkiewicz A, Bender M, Schledjewski R et al. In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber. Materials. 2021 Dez 31;15.2022(1):77. doi: 10.3390/ma15010077

Author

Wachtarczyk, Karol ; Gąsior, Paweł ; Kaleta, Jerzy et al. / In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber. in: Materials. 2021 ; Jahrgang 15.2022, Nr. 1.

Bibtex - Download

@article{55613156aa914a629b4b282434923554,
title = "In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber",
abstract = "In this paper, the application of a fiber Bragg grating written in a highly birefringent side-hole elliptical core optical fiber for two-axial strain measurement is presented. Hybrid optical fiber structures achieved by combining large side-holes and elliptical core result in a very high birefringence of 1 × 10−3 and thus high initial Bragg peak spectral separation of 1.16 nm, as well as a very high transverse force sensitivity, of up to 650 pm/(N/mm) or even −1150 pm/(N/mm), depending on the fiber orientation with respect to the applied force. Due to the ~22 %m/m GeO2 concentration in the core the fiber being highly photosensitive, which significantly simplifies FBG fabrication by UV illumination without the need for prior hydrogen loading, which worsens thermal stability. Finally, the developed FBGs written in the highly birefringent side-hole elliptical core optical fiber were embedded in the square composite plates and applied for strain measurements. Tests of two-directional four-point bending have shown usability of such FBG for two-axial in-plane strain measurement with a single FBG in iso-thermal conditions.",
keywords = "Fiber Optic Sensor, Fibre Bragg Grating, High birefringent fibers, Side-hole optical fibre, carbon fiber reinforced polymer, Multi-axial strain sensing",
author = "Karol Wachtarczyk and Pawe{\l} G{\c a}sior and Jerzy Kaleta and Alicja Anuszkiewicz and Marcel Bender and Ralf Schledjewski and Pawe{\l} Mergo and Tomasz Osuch",
year = "2021",
month = dec,
day = "31",
doi = "10.3390/ma15010077",
language = "English",
volume = "15.2022",
journal = "Materials",
issn = "1996-1944",
publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",
number = "1",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber

AU - Wachtarczyk, Karol

AU - Gąsior, Paweł

AU - Kaleta, Jerzy

AU - Anuszkiewicz, Alicja

AU - Bender, Marcel

AU - Schledjewski, Ralf

AU - Mergo, Paweł

AU - Osuch, Tomasz

PY - 2021/12/31

Y1 - 2021/12/31

N2 - In this paper, the application of a fiber Bragg grating written in a highly birefringent side-hole elliptical core optical fiber for two-axial strain measurement is presented. Hybrid optical fiber structures achieved by combining large side-holes and elliptical core result in a very high birefringence of 1 × 10−3 and thus high initial Bragg peak spectral separation of 1.16 nm, as well as a very high transverse force sensitivity, of up to 650 pm/(N/mm) or even −1150 pm/(N/mm), depending on the fiber orientation with respect to the applied force. Due to the ~22 %m/m GeO2 concentration in the core the fiber being highly photosensitive, which significantly simplifies FBG fabrication by UV illumination without the need for prior hydrogen loading, which worsens thermal stability. Finally, the developed FBGs written in the highly birefringent side-hole elliptical core optical fiber were embedded in the square composite plates and applied for strain measurements. Tests of two-directional four-point bending have shown usability of such FBG for two-axial in-plane strain measurement with a single FBG in iso-thermal conditions.

AB - In this paper, the application of a fiber Bragg grating written in a highly birefringent side-hole elliptical core optical fiber for two-axial strain measurement is presented. Hybrid optical fiber structures achieved by combining large side-holes and elliptical core result in a very high birefringence of 1 × 10−3 and thus high initial Bragg peak spectral separation of 1.16 nm, as well as a very high transverse force sensitivity, of up to 650 pm/(N/mm) or even −1150 pm/(N/mm), depending on the fiber orientation with respect to the applied force. Due to the ~22 %m/m GeO2 concentration in the core the fiber being highly photosensitive, which significantly simplifies FBG fabrication by UV illumination without the need for prior hydrogen loading, which worsens thermal stability. Finally, the developed FBGs written in the highly birefringent side-hole elliptical core optical fiber were embedded in the square composite plates and applied for strain measurements. Tests of two-directional four-point bending have shown usability of such FBG for two-axial in-plane strain measurement with a single FBG in iso-thermal conditions.

KW - Fiber Optic Sensor

KW - Fibre Bragg Grating

KW - High birefringent fibers

KW - Side-hole optical fibre

KW - carbon fiber reinforced polymer

KW - Multi-axial strain sensing

U2 - 10.3390/ma15010077

DO - 10.3390/ma15010077

M3 - Article

VL - 15.2022

JO - Materials

JF - Materials

SN - 1996-1944

IS - 1

M1 - 77

ER -