TY - JOUR

T1 - Inconel-Steel Multilayers by Liquid Dispersed Metal Powder Bed Fusion: Microstructure, Residual Stress and Property Gradients

AU - Bodner, Sabine C.

AU - van de Vorst, L.T.G.

AU - Zalesak, Jakub

AU - Todt, Juraj

AU - Keckes, Julius

AU - Maier-Kiener, Verena

AU - Sartory, Bernhard

AU - Schell, Norbert

AU - Hooijmans, J.W.

AU - Saurwalt, J.J.

AU - Keckes, Jozef

N1 - Publisher Copyright: © 2020 Elsevier B.V.

PY - 2020/3

Y1 - 2020/3

N2 - Synthesis of multi-metal hybrid structures with narrow heat affected zones, limited residual stresses and secondary phase occurrence represents a serious scientific and technological challenge. In this work, liquid dispersed metal powder bed fusion was used to additively manufacture a multilayered structure based on alternating Inconel 625 alloy (IN625) and 316 L stainless steel (316 L) layers on a 316 L base plate. Analytical scanning and transmission electron microscopies, high-energy synchrotron X-ray diffraction and nanoindentation analysis reveal sharp compositional, structural and microstructural boundaries between alternating 60 µm thick alloys’ sub-regions and unique microstructures at macro-, micro- and nano-scales. The periodic occurrence of IN625 and 316 L sub-regions is correlated with a cross-sectional hardness increase and decrease and compressive stress decrease and increase, respectively. The laser scanning strategy induced a growth of elongated grains separated by zig-zag low-angle grain boundaries, which correlate with the occurrence of zig-zag cracks propagating in the growth direction. A sharp <110> fiber texture within the 316 L regions turns gradually into a <100> fiber texture in the IN625 regions. The occurrence of the C-like stress gradient with a pronounced surface tensile stress of about 500 MPa is interpreted by the temperature gradient mechanism model. Chemical analysis indicates a formation of reinforcing spherical chromium-metal-oxide nano-dispersoids and demonstrates a possibility for reactive additive manufacturing and microstructural design at the nanoscale, as a remarkable attribute of the deposition process. Finally, the study shows that the novel approach represents an effective tool to combine dissimilar metallic alloys into unique bionic hierarchical microstructures with possible synergetic properties.

AB - Synthesis of multi-metal hybrid structures with narrow heat affected zones, limited residual stresses and secondary phase occurrence represents a serious scientific and technological challenge. In this work, liquid dispersed metal powder bed fusion was used to additively manufacture a multilayered structure based on alternating Inconel 625 alloy (IN625) and 316 L stainless steel (316 L) layers on a 316 L base plate. Analytical scanning and transmission electron microscopies, high-energy synchrotron X-ray diffraction and nanoindentation analysis reveal sharp compositional, structural and microstructural boundaries between alternating 60 µm thick alloys’ sub-regions and unique microstructures at macro-, micro- and nano-scales. The periodic occurrence of IN625 and 316 L sub-regions is correlated with a cross-sectional hardness increase and decrease and compressive stress decrease and increase, respectively. The laser scanning strategy induced a growth of elongated grains separated by zig-zag low-angle grain boundaries, which correlate with the occurrence of zig-zag cracks propagating in the growth direction. A sharp <110> fiber texture within the 316 L regions turns gradually into a <100> fiber texture in the IN625 regions. The occurrence of the C-like stress gradient with a pronounced surface tensile stress of about 500 MPa is interpreted by the temperature gradient mechanism model. Chemical analysis indicates a formation of reinforcing spherical chromium-metal-oxide nano-dispersoids and demonstrates a possibility for reactive additive manufacturing and microstructural design at the nanoscale, as a remarkable attribute of the deposition process. Finally, the study shows that the novel approach represents an effective tool to combine dissimilar metallic alloys into unique bionic hierarchical microstructures with possible synergetic properties.

UR - http://www.scopus.com/inward/record.url?scp=85077746351&partnerID=8YFLogxK

U2 - 10.1016/j.addma.2019.101027

DO - 10.1016/j.addma.2019.101027

M3 - Article

VL - 32.2020

JO - Additive Manufacturing

JF - Additive Manufacturing

SN - 2214-8604

IS - March

M1 - 101027

ER -