TY - JOUR

T1 - Hydrogen Production by Methane Pyrolysis in Molten Cu-Ni-Sn Alloys

AU - Scheiblehner, David

AU - Antrekowitsch, Helmut

AU - Neuschitzer, David

AU - Wibner, Stefan

AU - Sprung, Andreas

PY - 2023/7/21

Y1 - 2023/7/21

N2 - Hydrogen is an essential vector for transitioning today’s energy system. As a fuel or reactant in critical industrial sectors such as transportation and metallurgy, H2 can diversify the energy mix and supply and provide an opportunity to mitigate greenhouse-gas emissions. The pyrolysis of methane in liquid catalysts represents a promising alternative to producing hydrogen, as its energy demand is comparable to steam methane reforming, and no CO2 is produced in the base reaction. In this work, methane pyrolysis experiments were conducted using a graphite crucible filled with liquid ternary Cu-Ni-Sn alloys at 1160.0 °C. A statistical design of experiments allowed the generation of a model equation that predicts the achievable conversion rates in the ranges of the experiments. Furthermore, the experimental results are evaluated considering densities as well as surface tensions and viscosities in the investigated system, calculated with Butler and KRP equations, respectively. The highest methane conversion rate of 40.15% was achieved utilizing a melt of pure copper. The findings show that a combination of high catalytic activity with a high density and a low viscosity and surface tension of the melt results in a higher hydrogen yield. Furthermore, the autocatalytic effect of pyrolysis carbon is measured.

AB - Hydrogen is an essential vector for transitioning today’s energy system. As a fuel or reactant in critical industrial sectors such as transportation and metallurgy, H2 can diversify the energy mix and supply and provide an opportunity to mitigate greenhouse-gas emissions. The pyrolysis of methane in liquid catalysts represents a promising alternative to producing hydrogen, as its energy demand is comparable to steam methane reforming, and no CO2 is produced in the base reaction. In this work, methane pyrolysis experiments were conducted using a graphite crucible filled with liquid ternary Cu-Ni-Sn alloys at 1160.0 °C. A statistical design of experiments allowed the generation of a model equation that predicts the achievable conversion rates in the ranges of the experiments. Furthermore, the experimental results are evaluated considering densities as well as surface tensions and viscosities in the investigated system, calculated with Butler and KRP equations, respectively. The highest methane conversion rate of 40.15% was achieved utilizing a melt of pure copper. The findings show that a combination of high catalytic activity with a high density and a low viscosity and surface tension of the melt results in a higher hydrogen yield. Furthermore, the autocatalytic effect of pyrolysis carbon is measured.

U2 - 10.3390/met13071310

DO - 10.3390/met13071310

M3 - Article

VL - 13.2023

JO - Metals

JF - Metals

SN - 2075-4701

IS - 7

M1 - 1310

ER -