Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process. / Karimi-Sibaki, Ebrahim; Peyha, Mario; Vakhrushev, Alexander et al.
in: Scientific reports (e-only), Jahrgang 2022, Nr. 12, 20405, 12.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{ff6426604fc2450895858c824e984354,
title = "Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process",
abstract = "In the present study, we investigate arc plasma expansion in an industrial vacuum arc remelting (VAR) process using experimental and numerical tools. Stainless steel is the alloy of interest for the electrode (cathode) and ingot (anode). During the operation of the VAR process, behaviors of cathode spots and plasma arc were captured using the high-speed camera (Phantom v2512). We found that spots prefer to onset and remain within the partially melted surface at the center of the electrode tip. Existing spots outside the melting zone accelerate toward the edge of the electrode to extinguish. We observed a fairly symmetrical and centric plasma column during the operation. For further investigation of the observed arc column in our experiment, we used the two-fluid magnetohydrodynamics (MHD) model of plasma proposed by Braginskii. Thus, we modeled the arc column as a mixture of two continuous interpenetrating compressible fluids involving ions and electrons. Through numerical simulations, we calculated plasma parameters such as number density of ions/electrons, electric current density, flow of ions/electrons, temperature of ions/electrons, and light intensity for the observed arc column in our experiment. The calculated light intensity of plasma was compared with images captured by the camera to verify the model. The distribution of electric current density along the surface of the anode, namely ingot, is a decisive parameter that impacts the quality of the final product (ingot) in VAR process. Herein, we confirm that the traditionally used Gaussian distribution of electric current density along the surface of the ingot is viable.",
author = "Ebrahim Karimi-Sibaki and Mario Peyha and Alexander Vakhrushev and Menghuai Wu and Andreas Ludwig and Jan Bohacek and Bernhard Preiss and Abdellah Kharicha",
note = "Publisher Copyright: {\textcopyright} 2022, The Author(s).",
year = "2022",
month = dec,
doi = "10.1038/s41598-022-24595-7",
language = "English",
volume = "2022",
journal = "Scientific reports (e-only)",
issn = "2045-2322",
publisher = "Nature Publishing Group",
number = "12",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

AU - Karimi-Sibaki, Ebrahim

AU - Peyha, Mario

AU - Vakhrushev, Alexander

AU - Wu, Menghuai

AU - Ludwig, Andreas

AU - Bohacek, Jan

AU - Preiss, Bernhard

AU - Kharicha, Abdellah

N1 - Publisher Copyright: © 2022, The Author(s).

PY - 2022/12

Y1 - 2022/12

N2 - In the present study, we investigate arc plasma expansion in an industrial vacuum arc remelting (VAR) process using experimental and numerical tools. Stainless steel is the alloy of interest for the electrode (cathode) and ingot (anode). During the operation of the VAR process, behaviors of cathode spots and plasma arc were captured using the high-speed camera (Phantom v2512). We found that spots prefer to onset and remain within the partially melted surface at the center of the electrode tip. Existing spots outside the melting zone accelerate toward the edge of the electrode to extinguish. We observed a fairly symmetrical and centric plasma column during the operation. For further investigation of the observed arc column in our experiment, we used the two-fluid magnetohydrodynamics (MHD) model of plasma proposed by Braginskii. Thus, we modeled the arc column as a mixture of two continuous interpenetrating compressible fluids involving ions and electrons. Through numerical simulations, we calculated plasma parameters such as number density of ions/electrons, electric current density, flow of ions/electrons, temperature of ions/electrons, and light intensity for the observed arc column in our experiment. The calculated light intensity of plasma was compared with images captured by the camera to verify the model. The distribution of electric current density along the surface of the anode, namely ingot, is a decisive parameter that impacts the quality of the final product (ingot) in VAR process. Herein, we confirm that the traditionally used Gaussian distribution of electric current density along the surface of the ingot is viable.

AB - In the present study, we investigate arc plasma expansion in an industrial vacuum arc remelting (VAR) process using experimental and numerical tools. Stainless steel is the alloy of interest for the electrode (cathode) and ingot (anode). During the operation of the VAR process, behaviors of cathode spots and plasma arc were captured using the high-speed camera (Phantom v2512). We found that spots prefer to onset and remain within the partially melted surface at the center of the electrode tip. Existing spots outside the melting zone accelerate toward the edge of the electrode to extinguish. We observed a fairly symmetrical and centric plasma column during the operation. For further investigation of the observed arc column in our experiment, we used the two-fluid magnetohydrodynamics (MHD) model of plasma proposed by Braginskii. Thus, we modeled the arc column as a mixture of two continuous interpenetrating compressible fluids involving ions and electrons. Through numerical simulations, we calculated plasma parameters such as number density of ions/electrons, electric current density, flow of ions/electrons, temperature of ions/electrons, and light intensity for the observed arc column in our experiment. The calculated light intensity of plasma was compared with images captured by the camera to verify the model. The distribution of electric current density along the surface of the anode, namely ingot, is a decisive parameter that impacts the quality of the final product (ingot) in VAR process. Herein, we confirm that the traditionally used Gaussian distribution of electric current density along the surface of the ingot is viable.

UR - http://www.scopus.com/inward/record.url?scp=85142803616&partnerID=8YFLogxK

U2 - 10.1038/s41598-022-24595-7

DO - 10.1038/s41598-022-24595-7

M3 - Article

C2 - 36437373

AN - SCOPUS:85142803616

VL - 2022

JO - Scientific reports (e-only)

JF - Scientific reports (e-only)

SN - 2045-2322

IS - 12

M1 - 20405

ER -