Detection and characterisation of short fatigue cracks by inductive thermography

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

Detection and characterisation of short fatigue cracks by inductive thermography. / Oswald-Tranta, Beata.
in: Quantitative InfraRed Thermography Journal, Jahrgang 2021, 28.07.2021.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Bibtex - Download

@article{300187cb90164cc4802fa4efdf435b05,
title = "Detection and characterisation of short fatigue cracks by inductive thermography",
abstract = "Inductive thermography can be excellently used to detect surface cracks in metals. A short induction heating pulse (0.1-1s) induces eddy currents in the sample and an infrared camera records the surface temperature distribution. As cracks disturb the eddy current distribution and the heat diffusion, they become visible in the infrared images. In this paper it is investigated, how different parameters influence the surface pattern around short cracks (0.5-12mm length). The main emphasis is on finite element simulations, but some experimental results are presented, too. The influence of crack geometry, as crack depth, length, inclination angle and crack shape below the surface are investigated for ferro-magnetic and austenitic steel. Around the crack tips high temperature {\textquoteleft}hot spots{\textquoteright} can be observed, which intensity increases with the crack depth. But this intensity is strongly affected by the crack shape, whether it is rectangular, trapezoid or half-penny shape. For longer cracks (6-8mm length) simulation results show, that in the middle of the crack the phase distribution can be used to estimate the crack depth. Furthermore, the effect of experimental parameters, as excitation frequency, heating pulse duration and the angle between crack line and induction coil are investigated in order to optimize an experimental setup.",
keywords = "Thermography, induction thermography, crack detection, crack depth, crack length, crack shape",
author = "Beata Oswald-Tranta",
note = "Publisher Copyright: {\textcopyright} 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.",
year = "2021",
month = jul,
day = "28",
doi = "10.1080/17686733.2021.1953226",
language = "English",
volume = "2021",
journal = "Quantitative InfraRed Thermography Journal",
issn = "1768-6733",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - Detection and characterisation of short fatigue cracks by inductive thermography

AU - Oswald-Tranta, Beata

N1 - Publisher Copyright: © 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.

PY - 2021/7/28

Y1 - 2021/7/28

N2 - Inductive thermography can be excellently used to detect surface cracks in metals. A short induction heating pulse (0.1-1s) induces eddy currents in the sample and an infrared camera records the surface temperature distribution. As cracks disturb the eddy current distribution and the heat diffusion, they become visible in the infrared images. In this paper it is investigated, how different parameters influence the surface pattern around short cracks (0.5-12mm length). The main emphasis is on finite element simulations, but some experimental results are presented, too. The influence of crack geometry, as crack depth, length, inclination angle and crack shape below the surface are investigated for ferro-magnetic and austenitic steel. Around the crack tips high temperature ‘hot spots’ can be observed, which intensity increases with the crack depth. But this intensity is strongly affected by the crack shape, whether it is rectangular, trapezoid or half-penny shape. For longer cracks (6-8mm length) simulation results show, that in the middle of the crack the phase distribution can be used to estimate the crack depth. Furthermore, the effect of experimental parameters, as excitation frequency, heating pulse duration and the angle between crack line and induction coil are investigated in order to optimize an experimental setup.

AB - Inductive thermography can be excellently used to detect surface cracks in metals. A short induction heating pulse (0.1-1s) induces eddy currents in the sample and an infrared camera records the surface temperature distribution. As cracks disturb the eddy current distribution and the heat diffusion, they become visible in the infrared images. In this paper it is investigated, how different parameters influence the surface pattern around short cracks (0.5-12mm length). The main emphasis is on finite element simulations, but some experimental results are presented, too. The influence of crack geometry, as crack depth, length, inclination angle and crack shape below the surface are investigated for ferro-magnetic and austenitic steel. Around the crack tips high temperature ‘hot spots’ can be observed, which intensity increases with the crack depth. But this intensity is strongly affected by the crack shape, whether it is rectangular, trapezoid or half-penny shape. For longer cracks (6-8mm length) simulation results show, that in the middle of the crack the phase distribution can be used to estimate the crack depth. Furthermore, the effect of experimental parameters, as excitation frequency, heating pulse duration and the angle between crack line and induction coil are investigated in order to optimize an experimental setup.

KW - Thermography

KW - induction thermography

KW - crack detection

KW - crack depth

KW - crack length

KW - crack shape

UR - http://www.scopus.com/inward/record.url?scp=85111621838&partnerID=8YFLogxK

U2 - 10.1080/17686733.2021.1953226

DO - 10.1080/17686733.2021.1953226

M3 - Article

VL - 2021

JO - Quantitative InfraRed Thermography Journal

JF - Quantitative InfraRed Thermography Journal

SN - 1768-6733

ER -