Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Abstract

Material Extrusion Additive Manufacturing (MEAM) is mainly used for the production of polymeric components. Using feedstocks similar to those of powder injection moulding, MEAM of ceramic components is possible. MEAM with filaments is also called Fused Filament Fabrication. Feedstocks are used as filaments; this imposes new requirements such as flexibility for spooling, stiffness to avoid buckling and constant diameter to ensure a consistent mass flow. Additionally, the binder should be removed without damaging the shaped part. In this paper, the debinding behaviour of MEAM feedstocks with zirconia was investigated. It was observed that higher temperature increases the debinding rate, but cracks occurred; the addition of a surfactant speeds up the debinding rate and reduces cracks; and a mixture of 10% isopropanol and 90% cyclohexane initially decreases swelling during debinding, but the debinding rate and the appearance of cracks is unaffected.

Details

OriginalspracheEnglisch
Seitenumfang9
FachzeitschriftPowder Metallurgy
Jahrgang2019
DOIs
StatusVeröffentlicht - 15 Mai 2019