3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

Standard

3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites. / Rossegger, Elisabeth; Höller, Rita; Hrbinič, Katja et al.
in: Advanced engineering materials, Jahrgang 2022, Nr. ???, 2200749, 26.07.2022.

Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

APA

Rossegger, E., Höller, R., Hrbinič, K., Sangermano, M., Griesser, T., & Schlögl, S. (2022). 3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites. Advanced engineering materials, 2022(???), Artikel 2200749. Vorzeitige Online-Publikation. https://doi.org/10.1002/adem.202200749

Vancouver

Rossegger E, Höller R, Hrbinič K, Sangermano M, Griesser T, Schlögl S. 3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites. Advanced engineering materials. 2022 Jul 26;2022(???):2200749. Epub 2022 Jul 26. doi: 10.1002/adem.202200749

Author

Rossegger, Elisabeth ; Höller, Rita ; Hrbinič, Katja et al. / 3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites. in: Advanced engineering materials. 2022 ; Jahrgang 2022, Nr. ???.

Bibtex - Download

@article{f0ec7fd3a675456e9db2a9b9f41f14d0,
title = "3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites",
abstract = "Magnetoresponsive polymers have gained increased attention in the design of soft actuators as they can be spatially as well as temporally activated and enable an external noninvasive control of movement. By introducing the magnetoresponsive properties in photocurable resins, one can fabricate personalized and complex structures (via vat photopolymerization 3D printing), whose movement can be conveniently controlled by an external magnetic field. Advancing from acrylate-based photopolymers, which often suffer from shrinkage stress, low monomer conversion, and oxygen inhibition, the fabrication of magnetoresponsive thiol-click photopolymers containing Fe3O4 nanoparticles as magnetic fillers is highlighted. The addition of the thiol crosslinker yields soft and flexible polymer composites, whose cure kinetics, viscosity, thermal, and mechanical properties are studied as a function of the thiol and filler content. Although cure rate and final monomer conversion decrease with rising filler concentration, the cure kinetics is reasonably fast at 6 wt%. The short pot life, a result of thiol-Michael reactions induced by Fe3O4 nanoparticles, and a high thiol content, are overcome by the addition of an appropriate stabilizer. As proof of concept, 3D structures are fabricated by digital light processing (DLP) 3D printing and their magnetically driven movement is demonstrated.",
keywords = "3D printing, magnetoresponsive photopolymers, thiol-acrylate resins",
author = "Elisabeth Rossegger and Rita H{\"o}ller and Katja Hrbini{\v c} and Marco Sangermano and Thomas Griesser and Sandra Schl{\"o}gl",
note = "Publisher Copyright: {\textcopyright} 2022 Wiley-VCH GmbH.",
year = "2022",
month = jul,
day = "26",
doi = "10.1002/adem.202200749",
language = "English",
volume = "2022",
journal = " Advanced engineering materials",
issn = "1438-1656",
publisher = "Wiley-VCH ",
number = "???",

}

RIS (suitable for import to EndNote) - Download

TY - JOUR

T1 - 3D Printing of Soft Magnetoactive Devices with Thiol-Click Photopolymer Composites

AU - Rossegger, Elisabeth

AU - Höller, Rita

AU - Hrbinič, Katja

AU - Sangermano, Marco

AU - Griesser, Thomas

AU - Schlögl, Sandra

N1 - Publisher Copyright: © 2022 Wiley-VCH GmbH.

PY - 2022/7/26

Y1 - 2022/7/26

N2 - Magnetoresponsive polymers have gained increased attention in the design of soft actuators as they can be spatially as well as temporally activated and enable an external noninvasive control of movement. By introducing the magnetoresponsive properties in photocurable resins, one can fabricate personalized and complex structures (via vat photopolymerization 3D printing), whose movement can be conveniently controlled by an external magnetic field. Advancing from acrylate-based photopolymers, which often suffer from shrinkage stress, low monomer conversion, and oxygen inhibition, the fabrication of magnetoresponsive thiol-click photopolymers containing Fe3O4 nanoparticles as magnetic fillers is highlighted. The addition of the thiol crosslinker yields soft and flexible polymer composites, whose cure kinetics, viscosity, thermal, and mechanical properties are studied as a function of the thiol and filler content. Although cure rate and final monomer conversion decrease with rising filler concentration, the cure kinetics is reasonably fast at 6 wt%. The short pot life, a result of thiol-Michael reactions induced by Fe3O4 nanoparticles, and a high thiol content, are overcome by the addition of an appropriate stabilizer. As proof of concept, 3D structures are fabricated by digital light processing (DLP) 3D printing and their magnetically driven movement is demonstrated.

AB - Magnetoresponsive polymers have gained increased attention in the design of soft actuators as they can be spatially as well as temporally activated and enable an external noninvasive control of movement. By introducing the magnetoresponsive properties in photocurable resins, one can fabricate personalized and complex structures (via vat photopolymerization 3D printing), whose movement can be conveniently controlled by an external magnetic field. Advancing from acrylate-based photopolymers, which often suffer from shrinkage stress, low monomer conversion, and oxygen inhibition, the fabrication of magnetoresponsive thiol-click photopolymers containing Fe3O4 nanoparticles as magnetic fillers is highlighted. The addition of the thiol crosslinker yields soft and flexible polymer composites, whose cure kinetics, viscosity, thermal, and mechanical properties are studied as a function of the thiol and filler content. Although cure rate and final monomer conversion decrease with rising filler concentration, the cure kinetics is reasonably fast at 6 wt%. The short pot life, a result of thiol-Michael reactions induced by Fe3O4 nanoparticles, and a high thiol content, are overcome by the addition of an appropriate stabilizer. As proof of concept, 3D structures are fabricated by digital light processing (DLP) 3D printing and their magnetically driven movement is demonstrated.

KW - 3D printing

KW - magnetoresponsive photopolymers

KW - thiol-acrylate resins

UR - http://www.scopus.com/inward/record.url?scp=85135250953&partnerID=8YFLogxK

U2 - 10.1002/adem.202200749

DO - 10.1002/adem.202200749

M3 - Article

AN - SCOPUS:85135250953

VL - 2022

JO - Advanced engineering materials

JF - Advanced engineering materials

SN - 1438-1656

IS - ???

M1 - 2200749

ER -