The nanostructure wear and corrosion performance of arc-evaporated CrBxNy nanocomposite coatings

Polychronopoulou, K., Baker, M. A., Rebholz, C., Neidhardt, J., O 'Sullivan, M., Reiter, A., Kanakis, K., Leyland, A., Matthews, A. & Mitterer, C., 2009, in: Surface & coatings technology. S. 246-255

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of boron content on the tribological performance of Ti-N-B coatings prepared by thermal CVD

Wagner, J., Hochauer, D., Mitterer, C., Penoy, M., Michotte, C., Wallgram, W. & Kathrein, M., 2006, in: Surface & coatings technology. 201, S. 4247-4252

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of bias voltage on structure, thermal stability and mechanical properties of arc evaporated Cr0.69Ta0.20B0.11N coatings

Kainz, C., Pohler, M., Tkadletz, M., Czettl, C. & Schalk, N., 25 Dez. 2021, in: Surface & coatings technology. 428.2021, 25 December, 8 S., 127867.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of bias voltage on structure and mechanical/tribological properties of arc evaporated Ti-Al-V-N coatings

Pfeiler, M., Kutschej, K., Penoy, M., Michotte, C., Mitterer, C. & Kathrein, M., 2007, in: Surface & coatings technology. 202, S. 1050-1054

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of age-hardening on turning and milling performance of Ti–Al–N coated inserts

Chen, L., Du, Y., Mayrhofer, P. H., Wang, S. Q. & Li, J., 2008, in: Surface & coatings technology. 202, S. 5158-5161

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of yttrium incorporation on the oxidation resistance of Cr-Al-N coatings

Rovere, F., Mayrhofer, P. H., Reinholdt, A., Mayer, J. & Schneider, J. M., 2008, in: Surface & coatings technology. 202, S. 5870-5875

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu

Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, in: Surface & coatings technology. 206, S. 1855-1859

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of film thickness variations in peridic cracking: Analysis and experiments

Taylor, A. A., Edlmayr, V., Cordill, M. & Dehm, G., 2011, in: Surface & coatings technology. 206, S. 1830-1836

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of droplets in arc evaporated TiAlTaN hard coatings on the wear behavior

Tkadletz, M., Mitterer, C., Sartory, B., Letovsky-Papst, I., Czettl, C. & Michotte, C., 2014, in: Surface & coatings technology. 257, S. 95-101

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of chemical composition on the structure , chemistry and mechanical properties of magnetron sputtered W-B-C coatings : Modeling and experiments

Mizaei, S., Alishahi, M., Souček, P., Ženíšek, J., Holec, D., Koutná, N., Buršíková, V., Stupavská, M., Zábranský, L., Burmeister, F., Blug, B., Czigány, Z., Balázsi, K., Mikšová, R. & Vašina, P., 15 Feb. 2020, in: Surface & coatings technology. 383.2020, 15 February, 12 S., 125274.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)