Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb. 2025, in: Polymer Testing. 144.2025, March, 13 S., 108743.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 Mai 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 134.2024, May, 13 S., 108444.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation into the state of cure of elastomers through nanoindentation

Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T. & Pinter, G., 1 Apr. 2024, in: Polymer Testing. 133.2024, April, 9 S., 108417.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermal volume expansion as seen by Temperature-modulated optical refractometry, Oscillating dilatometry and Thermo-mechanical analysis

Klingler, A., Gilberg, M., Reisinger, D., Schlögl, S., Wetzel, B. & Krüger, J. K., 14 Jan. 2024, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 131.2024, February, 9 S., 108340.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept. 2023, in: Polymer Testing. 128.2023, November, 13 S., 108207.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug. 2023, in: Polymer Testing. 125.2023, August, 8 S., 108130.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug. 2023, in: Polymer Testing. 125.2023, August, 8 S., 108111.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Juli 2023, in: Polymer Testing. 124.2023, July, 10 S., 108098.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 März 2023, in: Polymer Testing. 120.2023, March, 10 S., 107977.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of polyethylene density from FTIR and Raman spectroscopy using multivariate data analysis

Bredács, M., Barretta, C., Castillon, L. F., Frank, A., Oreski, G., Pinter, G. & Gergely, S., Dez. 2021, in: Polymer Testing. 104.2021, December, 8 S., 107406.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Correlation of the cyclic cracked round bar test and hydrostatic pressure test for unplasticized polyvinylchloride

Frank, A., Messiha, M., Koch, T., Poduška, J., Hutař, P., Arbeiter, F. & Pinter, G., 19 Feb. 2021, in: Polymer Testing. 95.2021, March, 7 S., 107125.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comprehensive investigation of the viscoelastic properties of PMMA by nanoindentation

Christöfl, P., Czibula, C., Berer, M., Oreski, G., Teichert, C. & Pinter, G., 27 Nov. 2020, in: Polymer Testing. 93.2021, January, 9 S., 106978.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

J-testing of polymers via the load separation criterion based ESIS TC4 procedure: Effect of the specimen size

Gosch, A., Arbeiter, F. J., Agnelli, S., Berer, M., Pinter, G. & Baldi, F., Sept. 2020, in: Polymer Testing. 89, September, 10 S., 106637.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Slow crack growth resistance of modern PA-U12 grades measured by cyclic cracked round bar tests and strain hardening tests

Messiha, M., Gerets, B., Heimink, J., Frank, A., Arbeiter, F. & Engelsing, K., 3 März 2020, in: Polymer Testing. 86.2020, June, 11 S., 106468.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Automated monitoring of the crack propagation in mode I testing of thermoplastic composites by means of digital image correlation

Khudiakova, A., Grasser, V., Blumenthal, C., Wolfahrt, M. & Pinter, G. G., 1 Feb. 2020, in: Polymer Testing. 82.2020, February, 106304.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Tribological characteristics of medical gloves in contact with human skin and skin equivalents

Manhart, J., Hausberger, A., Maroh, B., Holzner, A., Schaller, R., Kern, W. & Schlögl, S., Feb. 2020, in: Polymer Testing. 82.2020, February, 7 S., 106318.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds

Kerschbaumer, R. C., Stieger, S., Gschwandl, M., Hutterer, T., Fasching, M., Lechner, B., Meinhart, L., Hildenbrandt, J., Schrittesser, B., Fuchs, P. F., Berger-Weber, G. & Friesenbichler, W., 26 Sept. 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 80.2019, December, S. 1-8 8 S., 106121.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung

High-density polyethylene as phase-change material: Long-term stability and aging

Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr. 2019, in: Polymer Testing. 76.2019, July, S. 433-442 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dez. 2018, in: Polymer Testing. 72, S. 271-284 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A novel hyperbolic slit contraction with constant strain rate for elongational rheology of polymer melts

Luger, H.-J., Löw-Baselli, B., Neunhäuserer, A., Friesenbichler, W. & Miethlinger, J., 9 Nov. 2018, in: Polymer Testing. 73.2019, February, S. 104-114 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of different polyol segments on the crystallisation behavior of polyurethane elastomers measured with DSC and DMA experiments

Ziegler, W., Guttmann, P., Kopeinig, S., Dietrich, M., Amirosanloo, S., Riess, G. & Kern, W., 1 Okt. 2018, in: Polymer Testing. 71.2018, October, S. 18-26 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Induced material degradation of elastomers in harsh environments

Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 15 Mai 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 69.2018, August, S. 107-115 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr. 2018, in: Polymer Testing. 66, S. 371-382 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of crosslinker and water on cyclic properties of carboxylated nitrile butadiene rubber (XNBR)

Fleischmann, D. D., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 12 März 2018, in: Polymer Testing. 67.2018, May, S. 309-321 13 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture mechanical characterization and lifetime estimation of near-homogeneous components produced by fused filament fabrication

Arbeiter, F., Spoerk, M., Wiener, J., Gosch, A. & Pinter, G., 5 Jan. 2018, in: Polymer Testing. 66.2018, April, S. 105-113 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of crosslinker and water on mechanical properties of carboxylated nitrile butadiene rubber (XNBR)

Fleischmann, D. D., Ayalur-Karunakaran, S., Arbeiter, F., Schaller, R., Holzner, A., Kern, W. & Schlögl, S., 5 Jan. 2018, in: Polymer Testing. 66.2018, April, S. 24-31 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical recyclability of technical biopolymers: Potential and limits

Resch-Fauster, K., Klein, A., Blees, E. & Feuchter, M., 1 Dez. 2017, in: Polymer Testing. 64.2017, December, S. 287-295 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A novel online rheometer for elongational viscosity measurement of polymer melts

Köpplmayr, T., Luger, H.-J., Burzic, I., Battisti, M., Perko, L., Friesenbichler, W. & Miethlinger, J., 23 Jan. 2016, (Elektronische Veröffentlichung vor Drucklegung.) in: Polymer Testing. 50.2016, April, S. 208-215 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Residual stress in polyethylene pipes

Poduska, J., Hutař, P., Kučera, J., Frank, A., Sadilek, J., Pinter, G. & Náhlík, L., 2016, in: Polymer Testing. 54, S. 288 295 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Measurement of interdiffusion in polymeric materials by applying Raman spectroscopy

Bruckmoser, K., Resch, K., Kisslinger, T. & Lucyshyn, T., Sept. 2015, in: Polymer Testing. 46, S. 122-133 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Juni 2015, in: Polymer Testing. 45, S. 83-92 10 S., 4441.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Method to characterize the damping behavior of thin passively constrained layer laminates using dynamic mechanical analysis (DMA) in shear mode

Knapp, G., Oreski, G. & Pinter, G., 2015, in: Polymer Testing. 42, S. 215 224 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermal expansion behavior of solar cell encapsulation materials

Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K. A., Voronko, Y., Eder, G., Koch, T. & Pinter, G., 2015, in: Polymer Testing. 44, S. 160-167

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, in: Polymer Testing. 39, S. 12-19

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

Arbeiter, F., Pinter, G. & Frank, A., 2014, in: Polymer Testing. 37, S. 186-192

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, in: Polymer Testing. S. 42-48

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test

Kratochvilla, T., Andreas, F. & Pinter, G., 2014, in: Polymer Testing. 40, S. 299-303

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool

Frank, A. & Pinter, G., 2014, in: Polymer Testing. 38, S. 161-171

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, in: Polymer Testing. 33, S. 7-12

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the strain measurement and stiffness calculation of carbon fibre reinforced composites under quasi-static tensile and tension-tension fatigue loads

Brunbauer, J. & Pinter, G., 2014, in: Polymer Testing. 40, S. 256-264

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The influence of a hydrolysis-inhibiting additive on the degradation and biodegradation of PLA and its nanocomposites

Stloukal, P., Kalendova, A., Mattausch, H., Laske, S., Holzer, C. & Koutny, M., 2014, in: Polymer Testing.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

Berer, M. & Pinter, G., 2013, in: Polymer Testing. 32, S. 870-879

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, in: Polymer Testing. S. 651-656

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characterization of physical and chemical aging of polymeric solar materials by mechanical testing

Kahlen, S., Jerabek, M., Wallner, G. & Lang, R., 2010, in: Polymer Testing. S. 72-81

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strain determination of polymeric materials using digital image correlation

Jerabek, M., Major, Z. & Lang, R., 2010, in: Polymer Testing. S. 407-416

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Uniaxial compression testing of polymeric materials

Jerabek, M., Major, Z. & Lang, R., 2010, in: Polymer Testing. S. 302-309

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use

Frank, A., Pinter, G. & Lang, R., 2009, in: Polymer Testing. 49, S. 737-745

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture analysis of annealed PVDF films

Wallner, G., Major, Z., Maier, G. & Lang, R., 2008, in: Polymer Testing. 27, S. 392-402

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Cyclic crack growth tests with CRB specimens for the evaluation of the long-term performance of PE pipe grades

Pinter, G., Haager, M., Balika, W. & Lang, R., 2007, in: Polymer Testing. 26, S. 180-188

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of nonylphenol-polyglycol-ether environments on the results of the full notch creep test

Pinter, G., Haager, M. & Lang, R. W., 2007, in: Polymer Testing. S. 700-710

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)