Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography

Lerchbacher, C., Zinner, S. & Leitner, H., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4989-4998

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Static recrystallization of molybdenum after deformation below 0.5TM(K)

Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4806-4818

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Textural evolution during dynamic recovery and static recrystallization of molybdenum

Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4794-4805

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

Wu, M., Domitner, J. & Ludwig, A., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 945-964

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

Purdy, G., Agren, J., Borgenstam, A., Bréchet, Y., Enomoto, M., Furuhara, T., Gamsjäger, E., Gouné, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, S. 3703-3718

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel

Hohenwarter, A., Taylor, A., Stock, R. & Pippan, R., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42, S. 1609-1618

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition

Zarif, M. Z., McKay, B. & Schumacher, P., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, S. 1684-1691

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug. 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 41A, 8, S. 2085-2092

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 727-733

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture and Delamination of Chromium Thin Films on Polymer Substrates

Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 870-875

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Precipitation Behavior of Fe-25 At. Pct Co-9 At. Pct Mo Investigated by In-Situ small-Angle Neutron Scattering and Coplementary Methods

Eidenberger, E., Schober, M., Stergar, E., Leitner, H., Staron, P. & Clemens, H., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 1230-1234

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

Pippan, R., Bachmaier, A. & Hafok, M., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 8-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Temperature on the Properties and Microstructures of Carbon Refractories for Blast Furnace

Chen, X., Li, Y., Li, Y., Jin, S., Zhao, L. & Ge, S., Juli 2009, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 40A, 7, S. 1675-1683

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Failure Mechanisms in a Fatigue-Loaded High-Performance Powder Metallurgical Tool Steel

Jesner, G. & Pippan, R., 2009, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 40A, S. 810-817

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture and Delamination of Chromium Thin Films on Polymer Substrates

Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2009, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 1-6

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hardening and Softening Behavior by Cyclic High-Pressure Torsion

Wetscher, F. & Pippan, R., 2009, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 1-6

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of the solid-liquid interface energy in the Al-Cu-Ag system

Bulla, A., Carreno-Bodensiek, C., Pustal, B., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 1 Sept. 2007, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38 A, 9, S. 1956-1964 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Using a three-phase deterministic model for the columnar-to-equiaxed transition

Wu, M. & Ludwig, A., 1 Juli 2007, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38 A, 7, S. 1465-1475 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Using a Three-Phase Deterministic Model for the Columnar-to-Equiaxed Transition (CET)

Wu, M. & Ludwig, A., 2007, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 38, S. 1465-1475

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A three-phase model for mixed columnar-equiaxed solidification

Wu, M. & Ludwig, A., 1 Mai 2006, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37.2006, 5, S. 1613-1631 19 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)