Processing of Nanocrystalline Inconel 718—Graphite Composites by High-Pressure Torsion

Kasalo, M., Suarez, S., Keckes, J. F., Kiener, D. & Bachmaier, A., Apr. 2025, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 56, 6, S. 1461–1476

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Effect of Homogenization and Hot Deformation on the Recrystallization Behavior in Aluminum Alloy AA8079

Santora, E., Pachnek, F., Falkinger, G., Pogatscher, S. & Hirsch, J., 23 Sept. 2024, in: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 55.2024, 12, S. 4914-4927 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Structure–Property Relations in Pb-Supersaturated Metastable Sn-Rich Pb-Sn Alloys

Friák, M., Cipek, P., Pavlu, J., Zobac, O., Roupcova, P., Miháliková, I., Holec, D., Msallamova, S. & Michalcova, A., 4 Apr. 2024, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 55.2024, June, S. 1867-1877 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

In Situ Study of Peritectic Couple Growth Under Purely Diffusive Conditions

Ludwig, A. & Mogeritsch, J. P., 26 Apr. 2023, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 6, 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan. 2023, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, S. 75-96 22 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The Role of Phase Hardness Differential on the Non-uniform Elongation of a Ferrite-Martensite Dual Phase Steel

Basu, S., Jaya, B. N., Patra, A., Ganguly, S., Dutta, M., Hohenwarter, A. & Samajdar, I., Sept. 2021, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, 9, S. 4018-4032 15 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug. 2021, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, S. 4609–4622 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 Mai 2021, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, S. 3007-3022 16 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation-Mode-Sensitive Behavior of CuZr-Based Bulk Metallic Glasses Under Dynamic Loading

Rezvan, A., Sarac, B., Soprunyuk, V., Spieckermann, F., Gammer, C., Sheng, H., Sifferlinger, N. A. & Eckert, J., 2021, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 2021, 52, 8, S. 8-13 6 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems

Bernhard, M. C., Presoly, P., Fuchs, N., Bernhard, C. & Kang, Y.-B., 23 Juli 2020, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 10, S. 5351-5364 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Experimental and Numerical Investigation of the Deformation and Fracture Mode of Microcantilever Beams Made of Cr(Re)/Al2O3 Metal-Matrix Composite

Weglewski, W., Pitchai, P., Bochenek, K., Bolzon, G., Konetschnik, R., Sartory, B., Ebner, R., Kiener, D. & Basista, M., Mai 2020, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, May, S. 2377-2390 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys

Maity, S., Chanda, D. K., Ramasamy, P., Show, B. K., Eckert, J. & Bera, S., 1 Nov. 2019, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, S. 109-115 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution during Rolling of Directionally Solidified Ag-Cu Eutectic Alloy

LI, J., Li, J., Renk, O., Pippan, R. & Ghosh, P., 31 Okt. 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, S. 368-379 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influences of Thermomechanical Treatment and Nb Micro-alloying on the Hardenability of Ultra-High Strength Steels

Esterl, R., Sonnleitner, M. & Schnitzer, R., 29 Apr. 2019, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 7, S. 3238 - 3245 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

An Experimental Benchmark of Non-metallic Inclusion Distribution Inside a Heavy Continuous-Casting Slab

Liu, Z., Li, B., Wu, M., Xu, G., Ruan, X. & Ludwig, A., 2 Jan. 2019, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 3, S. 1370-1379 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Strengthening Effects in Nano-/Ultrafine-Grained Carbon Nanotube Reinforced-Titanium Composites Investigated by Finite Element Modeling

Li, F., Hao, P., Yi, J., Prashanth, K. G., Maity, T. & Eckert, J., 23 Dez. 2018, (Elektronische Veröffentlichung vor Drucklegung.) in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 12, S. 6469-6478 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Sample Size and Strain-Rate-Sensitivity Effects on the Homogeneity of High-Pressure Torsion Deformed Disks

Hohenwarter, A. & Pippan, R., 21 Nov. 2018, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 50.2019, 2, S. 601-608 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the Coupling Mechanism of Equiaxed Crystal Generation with the Liquid Flow Driven by Natural Convection During Solidification

Stefan-Kharicha, M., Kharicha, A., Wu, M. & Ludwig, A., 14 Feb. 2018, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 49.2018, 5, S. 1708-1724 17 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

Li, F., Yi, J. & Eckert, J., 12 Okt. 2017, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 12, S. 6027-6037 11 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A Novel Heat Treatment Process for Surface Hardening of Steel: Metal Melt Surface Hardening

Fu, Y.-S., Zhang, W., Xu, X., LI, J., Li, J., Xia, M. & Li, J., 21 Juni 2017, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, September, S. 3975-3979 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation

Li, F., Yi, J. & Eckert, J., 28 März 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, S. 2971-2978 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Massive Formation of Equiaxed Crystals by Avalanches of Mushy Zone Segments

Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 16 März 2017, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, S. 2927-2931 5 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 Mai 2016, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, S. 3694-3703 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On Macrosegregation

Ludwig, A., Wu, M. & Kharicha, A., 1 Nov. 2015, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, 11, S. 4854-4867 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Nucleation and Growth of Eutectic Si in Al-Si Alloys with Na Addition

Li, J., BARRIRERO, J., ENGSTLER, M., ABOULFADL, H., MüCKLICH, F. & Schumacher, P., 2015, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Statistical quantification of the impact of surface preparation on yield point phenomena in nickel

Lawrence, S. K., Zbib, H. M., Cordill, M. J., Wurster, S. & Bahr, D. F., 1 Jan. 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, 10, S. 4307-4315 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Induction hardening vs conventional hardening of a heat treatable steel

Sackl, S. C., Leitner, H., Zuber, M., Clemens, H. & Primig, S., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45A, S. 5657-5666

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, S. 4210-4219

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, S. 362-376

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Secondary Al-Si-Mg High-pressure Die Casting Alloys with Enhanced Ductility

Bösch, D., Pogatscher, S., Hummel, M., Fragner, W., Uggowitzer, P., Göken, M. & Höppel, H. W., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 3, S. 1035-1045

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

Ressel, G., Primig, S. & Leitner, H., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, S. 1552-1558

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermodynamic Modeling of the Cr-Fe-S System

Waldner, P., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, S. 798-814

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Schaden, T. & Reiter, J., 24 Okt. 2013, (Elektronische Veröffentlichung vor Drucklegung.) in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45.2014, 3, S. 1415-1434 20 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prediction of the as-cast structure of Al-4.0 Wt Pct Cu ingots

Ahmadein, M., Wu, M., Li, J. H., Schumacher, P. & Ludwig, A., 1 Juni 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, 6, S. 2895-2903 9 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Application of microprobe analysis to the reconstruction and characterization of dendritic structures

Domitner, J., Kharicha, A., Wu, M. & Ludwig, A., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 607-616

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

Presoly, P., Bernhard, C. & Pierer, R., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 5377-5388

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Modeling the effect of strand surface bulging and mechanical softreduction on the macrosegregation formation in steel continuous casting

Domitner, J., Wu, M., Kharicha, A., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science .

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Refinement of Eutectic Si Phase in Al-5Si Alloys with Yb Additions

Li, J., SUETSUGU, S., TSUNEKAWA, Y. & Schumacher, P., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 669-681

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part I

Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 650-660

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

“Simultaneous observation of melt flow and motion of equiaxed crystals during solidification using a dual phase Particle Image Velocimetry technique. Part II

Kharicha, A., Stefan Kharicha, M., Ludwig, A. & Wu, M., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 661-668

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Retained austenite decomposition and carbide formation during tempering a hot-work tool steel X38CrMoV5-1 studied by dilatometry and atom probe tomography

Lerchbacher, C., Zinner, S. & Leitner, H., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4989-4998

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Static recrystallization of molybdenum after deformation below 0.5TM(K)

Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4806-4818

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Textural evolution during dynamic recovery and static recrystallization of molybdenum

Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4794-4805

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

Wu, M., Domitner, J. & Ludwig, A., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 945-964

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

Purdy, G., Agren, J., Borgenstam, A., Bréchet, Y., Enomoto, M., Furuhara, T., Gamsjäger, E., Gouné, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, S. 3703-3718

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Large Shear Deformations on the Fracture Behavior of a Fully Pearlitic Steel

Hohenwarter, A., Taylor, A., Stock, R. & Pippan, R., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42, S. 1609-1618

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Study of Heterogeneous Nucleation of Eutectic Si in High-Purity Al-Si Alloys with Sr Addition

Zarif, M. Z., McKay, B. & Schumacher, P., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, S. 1684-1691

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Microstructures and Properties of Carbon Refractories for Blast Furnaces with SiO2 and Al Additions

Li, Y., Chen, X., Sang, S., Li, Y., Jin, S., Zhao, L. & Ge, S., Aug. 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 41A, 8, S. 2085-2092

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 727-733

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture and Delamination of Chromium Thin Films on Polymer Substrates

Cordill, M., Taylor, A., Schalko, J. & Dehm, G., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 870-875

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)