Refinement of eutectic Si in high purity Al-5Si alloys with combined Ca and P additions

Ludwig, T., Li, J., Schaffer, P., Schumacher, P. & Arnberg, L., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, S. 362-376

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evolution of Bimodal Microstructure and High-Temperature Wear Resistance of Al-Cu-Ni Alloys

Maity, S., Chanda, D. K., Ramasamy, P., Show, B. K., Eckert, J. & Bera, S., 1 Nov. 2019, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 51.2020, 1, S. 109-115 7 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of deformation on the precipitation behavior of Nb (CN) in austenite and ferrite

Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E. & Leitner, H., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45 A, S. 4210-4219

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium

Pippan, R., Sabirov, I., Valiev, R. Z. & Semenova, I. P., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 727-733

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation

Pippan, R., Bachmaier, A. & Hafok, M., 2010, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . S. 8-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

Presoly, P., Bernhard, C. & Pierer, R., 2013, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 44, S. 5377-5388

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Textural evolution during dynamic recovery and static recrystallization of molybdenum

Primig, S., Leitner, H., Knabl, W., Lorich, A., Clemens, H. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4794-4805

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Static recrystallization of molybdenum after deformation below 0.5TM(K)

Primig, S., Leitner, H., Knabl, W., Lorich, A. & Stickler, R., 2012, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, S. 4806-4818

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

Purdy, G., Agren, J., Borgenstam, A., Bréchet, Y., Enomoto, M., Furuhara, T., Gamsjäger, E., Gouné, M., Hillert, M., Hutchinson, C., Militzer, M. & Zurob, H., 2011, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 42A, S. 3703-3718

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effect of Zr incorporation caused by ball abrasion in a milled Fe-Y2O3 model alloy

Ressel, G., Primig, S. & Leitner, H., 2014, in: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 45, S. 1552-1558

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)