Materials science and engineering: A, Structural materials: properties, microstructure and processing, ‎0921-5093

Fachzeitschrift: Zeitschrift

ISSNs0921-5093
Weitere suchbare ISSN (eISSN)1873-4936

Publikationen

  1. 2005
  2. Veröffentlicht

    Stress/Strain Behaviour and Fatigue Limit of Grey Cast Iron

    Willidal, T., Bauer, W. & Schumacher, P., 2005, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 578-582

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  3. Veröffentlicht
  4. Veröffentlicht

    The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

    Sabirov, I., Duschlbauer, D., Pettermann, H. E. & Kolednik, O., 2005, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 393, S. 275-285

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  5. Veröffentlicht

    Modeling the columnar-to-equiaxed transition with a three-phase Eulerian approach

    Ludwig, A. & Wu, M., 15 Dez. 2005, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 413-414, S. 109-114 6 S.

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  6. 2006
  7. Veröffentlicht

    Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance

    Rester, M., Neidhardt, J., Eklund, P., Emmerlich, J., Ljungcrantz, H., Hultman, L. & Mitterer, C., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 90-95

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  8. Veröffentlicht

    Characterisation of Residual Stresses in Turbine Discs by Neutron and High-Energy X-Ray Diffraction and Comparisation to Finite Element Modeling

    Cihak, U., Staron, P., Clemens, H., Homeyer, J., Stockinger, M. & Tockner, J., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 437, S. 75-82

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  9. Veröffentlicht

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, S. 96-106

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  10. Veröffentlicht

    Dynamic recrystallization of NI-base alloys-Experimental results and comparisons with simulations

    Poelt, P., Sommitsch, C., Mitsche, S. & Walter, M., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. S. 306-314

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  11. Veröffentlicht

    Evolution of misorientation distribution during warm 'abc' forging of commercial-purity titanium

    Mironov, S. Y., Salishchev, G. A., Myshlyaev, M. M. & Pippan, R., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 418, S. 257-267

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)

  12. Veröffentlicht

    Microstructural evolution of Cr-Mn-N Austenitic Steels during Cold Work Hardening

    Saller, G., Spiradek-Hahn, K., Scheu, C. & Clemens, H., 2006, in: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 427, S. 246-254

    Publikationen: Beitrag in FachzeitschriftArtikelForschung(peer-reviewed)