Study of sensitization and different heating cycles on stainless steels used for automotive exhaust components

Yasir, M., Mori, G., Wieser, H., Reller, A. & Höppel, H. W., 1 Sept. 2012, in: Materials and Corrosion. 63, 9, S. 763-776 14 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Evaluation of CPT values determined by ASTM G48 practice. Report on round robin tests of the Corrosion Committee of the Austrian Society of Metallurgy

Wieser, H., Zitter, H. & Mori, G., 2002, in: Materials and Corrosion. S. 37-43

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Corrosion fatigue of a manganese-nitrogen stabilized austenitic stainless steel

Sonnleitner, R., Mori, G., Panzenböck, M. & Fluch, R., 2010, in: Materials and Corrosion. 61, S. 97-104

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of corrosion fatigue on the fatigue strength of an AlSi10MgMn high-pressure die-casting alloy with regard to the surface condition

Schönowitz, M., Maier, B., Grün, F. & Bauer-Troßmann, K., 25 Mai 2023, in: Materials and Corrosion. 74.2023, 9, S. 1382-1389 8 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Behaviour of S31400 and S32205 steels in HCl- and H2S-containing gas atmospheres under a low oxygen partial pressure between 480 – 680 °C

Schmid, A., Mori, G. K., Haubner, R., Weil, M. & Hönig, S., 27 Feb. 2018, in: Materials and Corrosion. DOI: 10.1002/maco.201709992, S. 1328 - 1337

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hydrogen embrittlement of high strength steel under in situ corrosive charging conditions and tensile load

Scharf, R., Muhr, A., Stellnberger, K.-H., Faderl, J., Holzer, C. & Mori, G. K., 21 Juni 2016, in: Materials and Corrosion. 68.2017, 1, S. 95-104 10 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Hydrogen embrittlement of DP-1000 flat steel sheet: Influence of mechanical properties, specimen geometry, pre-damaging and electrolytically zinc galvanizing

Scharf, R., Muhr, A., Luckeneder, G. H., Larour, P., Mraczek, K., Rehrl, J., Leomann, F., Stellnberger, K.-H., Faderl, J. & Mori, G. K., 1 März 2016, in: Materials and Corrosion. 67.2016, 3, S. 239-250 12 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigations on susceptibility to intergranular corrosion of thermo-mechanically rolled corrosion-resistant materials 316L and Alloy 825

Prohaska, M., Mori, G., Grill, R., Tischler, G. & Mitsche, S., 2013, in: Materials and Corrosion. S. 290-299

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of chromium, molybdenum and cobalt on the corrosion behaviour of high carbon steels in dependence of heat treatment

Peissl, S., Mori, G., Leitner, H., Ebner, R. & Eglsäer, S., 2006, in: Materials and Corrosion. S. 759-765

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

High temperature corrosion behavior of alloys in reducing HCL and H2S containing atmospheres: Thermodynamical and experimental assessment

Nimmervoll, M., Mori, G. K., Bucher, E., Hönig, S. & Haubner, R., 3 Aug. 2022, (Elektronische Veröffentlichung vor Drucklegung.) in: Materials and Corrosion. 73.2022, 12, S. 1979-2003 25 S.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)