Reprocessable carbon fiber vitrimer composites: Reclamation and reformatting of carbon fibers for second generation composite materials

Sharma, H., Bender, M., Kim, G., Lee, D., Caglayan, C., Schlögl, S., Yun, G. J., Kumar, A. & Rana, S., 24 Aug. 2024, in: Journal of Applied Polymer Science. 141.2024, 41, 15 S., e56074.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dual cross-linking of XNBR latex with epoxy-functional calcium silicate particles for the production of accelerator-free medical gloves

Grabmayer, T., Manhart, J., Fleischmann, D., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 20 Juni 2024, in: Journal of applied polymer science. 141.2024, 24, 12 S., e55498.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 Mai 2024, in: Journal of applied polymer science. 141.2024, 30, 14 S., e55694.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation

Malik, M. S., Wolfahrt, M., Domínguez Pardo, J. J., Bublitz, D. & Schlögl, S., 5 März 2024, in: Journal of applied polymer science. 141.2024, 9, 13 S., e55024.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Investigation on strategies for optimizing process definition in rubber processing: A study on mechanical and chemical properties of vulcanizates as basis for the development of a new calculation model for quality prediction

Traintinger, M., Kerschbaumer, R. C., Hornbachner, M., Lechner, B. & Lucyshyn, T., 10 Feb. 2024, in: Journal of applied polymer science. 141.2024, 6, 18 S., e54901.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug. 2023, in: Journal of applied polymer science. 140.2023, 31, 17 S., e54111.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr. 2023, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of applied polymer science. 140.2023, 25, 12 S., e53973.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical flexible epoxy resins with 100% bio-basedcarbon content based on epoxidized vegetable oils

Schwaiger, M. & Resch-Fauster, K., 6 Okt. 2022, in: Journal of Applied Polymer Science. 139.2022, 48, 11 S., e53233.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

On the slow crack growth process and associated structure–property relationships in polyamide 12 grades

Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 20 Juni 2022, in: Journal of applied polymer science. 139.2022, 24, 15 S., 52357.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Morphology and properties of foamed high crystallinity PEEK prepared by high temperature thermally induced phase separation

Rusakov, D., Menner, A., Spieckermann, F., Wilhelm, H. & Bismarck, A., 5 Jan. 2022, in: Journal of applied polymer science. 139, 1, 51423.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Mechanical behavior of 3D-printed polymeric metamaterials for lightweight applications

Truszkiewicz, E., Thalhamer, A., Rossegger, M., Vetter, M., Meier, G., Rossegger, E., Fuchs, P., Schlögl, S. & Berer, M., 1 Nov. 2021, in: Journal of applied polymer science. 139, 6, 51618.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Application of organosilane coatings for improved anti-adhesive properties enabling facilitated demolding in polymer processing

Bandl, C., Krempl, N., Berger-Weber, G., Kern, W. & Friesenbichler, W., 10 März 2021, in: Journal of Applied Polymer Science. 138.2021, 30, 9 S., 50714.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Curing of epoxidized linseed oil: Investigation of the curing reaction with different hardener types

Todorovic, A., Resch-Fauster, K., Mahendran, A. R., Oreski, G. & Kern, W., 4 Nov. 2020, in: Journal of Applied Polymer Science. 138.2021, 16, 13 S., 50239.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Increased reliability of modified polyolefin backsheet over commonly used polyester backsheets for crystalline PV modules

Omazic, A., Oreski, G., Edler, M., Eder, G. C., Hirschl, C., Pinter, G. & Erceg, M., 10 Aug. 2020, in: Journal of Applied Polymer Science. 137.2020, 30, 8 S., 48899.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Okt. 2019, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of applied polymer science. 137.2020, 12, 16 S., 48454.

Publikationen: Beitrag in Fachzeitschrift › Übersichtsartikel › (peer-reviewed)

Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Juli 2019, in: Journal of Applied Polymer Science. 137.2020, 2, 10 S., 48269.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Bonded aerospace repairs under tensile loading: Wet chemical surface treatment and selected environmental conditions: Wet chemical surface treatment and selected environmental conditions

Röper, F., Wolfahrt, M., Schlögl, S., Kucher, G. & Pinter, G., 15 Mai 2019, in: Journal of Applied Polymer Science. 136.2019, 19, 47506.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr. 2018, in: Journal of Applied Polymer Science. 135.2018, 31, S. 1-9 9 S., 46535.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Model Free Kinetics coupled with Finite Element Method for curing simulation of thermosetting epoxy resins

Tao, Q., Pinter, G. G., Antretter, T., Krivec, T. & Fuchs, P., 2018, in: Journal of Applied Polymer Science. S. 1-8

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Permeation of hydrocarbons through organosilane crosslinked LDPE

Berger, K., Keimel, C., Helfer, E., Haar, B., Eder, A., Mattausch, H. & Riess, G., 20 Okt. 2017, in: Journal of applied polymer science. 134.2017, 40, 8 S., 45374.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Polymer nanocomposites with cellulose nanocrystals made by co-precipitation

Natterodt, J. C., Shirole, A., Sapkota, J., Zoppe, J. & Weder, C., 9 Aug. 2017, in: Journal of Applied Polymer Science. 135.2018, 24, 9 S., 45648.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)

Spörk, M., Arbeiter, F., Cajner, H., Sapkota, J. & Holzer, C., 26 Juni 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of Applied Polymer Science. 134.2017, 41, 15 S., 45401.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Crosslinking and post-crosslinking of ethylene vinyl acetate in photovoltaic modules

Oreski, G., Rauschenbach, A., Hirschl, C., Kraft, M., Eder, G. C. & Pinter, G. G., 15 Juni 2017, in: Journal of Applied Polymer Science. 134.2017, 23, 9 S., 44912.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A refined model for the mechanical properties of polymer composites with nanorods having different length distributions

Sapkota, J., Gooneie, A., Shirole, A. & Martinez Garcia, J. C., 25 Mai 2017, in: Journal of Applied Polymer Science. 134.2017, 36, 7 S., 45279.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

Sapkota, J., Martinez Garcia, J. C. & Lattuada, M., 15 Mai 2017, in: Journal of Applied Polymer Science. 134.2017, 35, 6 S., 45254.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

The effects of e-beam crosslinking of LDPE on the permeation of hydrocarbons

Berger, K., Keimel, C., Helfer, E., Haar, B., Mattausch, H., Riess, G. & Kern, W., 6 März 2017, (Elektronische Veröffentlichung vor Drucklegung.) in: Journal of Applied Polymer Science. 134.2017, 25, 8 S., 44968.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Enhancing the stability of UV‐curable thiol/vinyl carbonate resins

Edler, M., Mostegel, F., Roth, M., Österreicher, A. & Kappaun, S., 20 Feb. 2017, in: Journal of Applied Polymer Science. 134.2017, 24, 7 S., 44934.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung

Influence of molecular structure and reinforcement on fatigue behavior of tough polypropylene materials

Arbeiter, F., Frank, A. & Pinter, G. G., 10 Okt. 2016, in: Journal of Applied Polymer Science. 133.2016, 38, 16 S., 43948.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wetting behavior of polymer melts on coated and uncoated tool steel surfaces

Zitzenbacher, G., Huang, Z., Längauer, M., Forsich, C. & Holzer, C., 16 Feb. 2016, in: Journal of Applied Polymer Science. 133.2016, 21, 10 S., 43469.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Correlation study of damp heat and pressure cooker testing on backsheets

Ottersböck, B., Oreski, G. & Pinter, G., 2016, in: Journal of Applied Polymer Science. 133, 47, 44230.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Weld line improvement of short fiber reinforced thermoplastics with a movable flow obstacle

Janko, M., Spiegl, B., Kaufmann, A., Lucyshyn, T. & Holzer, C., 15 Juni 2015, in: Journal of Applied Polymer Science. 132, 23, S. 1-12 12 S., 42025.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of processing conditions on crystallization behavior and mechanical properties of poly(lactic acid) staple fibers

Bruckmoser, K. & Resch, K., 20 Mai 2015, in: Journal of Applied Polymer Science. 132.2015, 33

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Degradation of photovoltaic backsheets: Comparison of the aging induced changes on module and component level

Knausz, M., Oreski, G., Eder, G. C., Voronko, Y., Duscher, B., Koch, T., Pinter, G. & Berger, K. A., 2015, in: Journal of Applied Polymer Science. 132, 24, 42093.

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins

Berer, M., Pinter, G. & Feuchter, M., 5 Okt. 2014, in: Journal of Applied Polymer Science. 131, 19

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Fundamental Influences on Quasistatic and Cyclic Material Behavior of Short Glass Fiber Reinforced Polyamide Illustrated on Microscopic Scale

Brunbauer, J., Pinter, G., Mösenbacher, A. & Guster, C., 2014, in: Journal of Applied Polymer Science. 131, S. 1-14

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermotropic glazings for overheating protection. II. Morphology and structure-property relationships

Weber, A., Klein, A. & Resch, K., 2014, in: Journal of Applied Polymer Science. S. 39910-1-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermotropic glazings for overheating protection. I. Material preselection, formulation, and light-shielding efficiency

Weber, A. & Resch, K., 2014, in: Journal of Applied Polymer Science. S. 39950-1-13

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Thermotropic systems with fixed domains exhibiting enhanced overheating protection performance

Weber, A. & Resch, K., 2014, in: Journal of Applied Polymer Science. S. 40417-1-10

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Wireless in-mold melt front detection for injection molding: A long-term evaluation

Müller, F., Kukla, C., Lucyshyn, T., Harker, M., Rath, G. & Holzer, C., 2014, in: Journal of Applied Polymer Science. 131, S. 5628-5638

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dual cross-linking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

Lenko, D., Schloegl, S., Temel, A., Kern, W., Schaller, R. & Holzner, A., 2013, in: Journal of Applied Polymer Science. 129, S. 2735-2743

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Dual crosslinking of carboxylated nitrile butadiene rubber latex employing the thiol-ene photoreaction

Schlögl, S., Kern, W., Holzner, A., Schaller, R. & Lenko, D., 2013, in: Journal of Applied Polymer Science. 129, S. 2735-2743

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Effect of formulation and processing conditions on light shielding efficiency of thermotropic systems with fixed domains based on UV curing acrylate resins

Weber, A., Schlögl, S. & Resch, K., 2013, in: Journal of Applied Polymer Science. 130, S. 3299-3310

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Measuring the residence time distribution in a twin screw extruder with the use of NIR-spectroscopy

Laske, S., Witschnigg, A., Selvasankar, R. K. & Holzer, C., 2013, in: Journal of Applied Polymer Science. 131, S. 39919-39924

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Polypropylene/Polyethylene Blends as Models for High-Impact Propylene-Ethylene Copolymers, Part 2: Relation Between Composition and Mechanical Performance

Kock, C., Aust, N., Grein, C. & Gahleitner, M., 2013, in: Journal of Applied Polymer Science. 130, S. 287-296

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Preparation of UV reactive montmorillonite and characterisation of its nanocomposites with poly(vinyl alcohol)

Schauberger, J., Rieß, G. & Kern, W., 2013, in: Journal of Applied Polymer Science. 130, S. 665-672

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Presentation of a Novel Sensor Based on Acoustic Emission in Injection Molding

Müller, F., Rath, G., Lucyshyn, T., Kukla, C., Burgsteiner, M. & Holzer, C., 2013, in: Journal of Applied Polymer Science. 127, S. 4744-4749

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

UV crosslinking of Fe+3 doped poly(vinyl alcohol) - characterization of optical properties and swelling behaviour

Schauberger, J., Rieß, G. & Kern, W., 2013, in: Journal of Applied Polymer Science. 129, S. 3623-3628

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

A Physical Model for a Quality Control Concept in Injection Molding

Lucyshyn, T., Kipperer, M., Kukla, C., Langecker, G. & Holzer, C., 2012, in: Journal of Applied Polymer Science. 124, S. 4926-4934

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Characteristics of the photochemical prevulcanization in a falling film photoreactor

Schlögl, S., Kern, W., Temel, A., Schaller, R. & Holzner, A., 2012, in: Journal of Applied Polymer Science. S. 3478-3486

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)

Determination of the Transition Temperature at Different Cooling Rates and Its Influence on Prediction of Shrinkage and Warpage in Injection Molding Simulation

Lucyshyn, T., Knapp, G., Kipperer, M. & Holzer, C., 2012, in: Journal of Applied Polymer Science. 123, S. 1162-1168

Publikationen: Beitrag in Fachzeitschrift › Artikel › Forschung › (peer-reviewed)